Coupled Bending-Bending-Torsion Vibration of a Pre-Twisted Beam with Aerofoil Cross-Section by Finite Element Method

Shock and Vibration, Sep 2018

Bulent Yardimoglu, Daniel J. Inman

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

http://downloads.hindawi.com/journals/sv/2003/135305.pdf

Coupled Bending-Bending-Torsion Vibration of a Pre-Twisted Beam with Aerofoil Cross-Section by Finite Element Method

Shock and Vibration 1070-9622 0 by Bulent Yardimoglu and Daniel J. Inman Coupled bending-bending-torsion vibration of a pre-twisted beam with aerofoil cross-section by finite element method - p. 224: in Eq. (13), upper limit of fourth integration should be L instead of T . p. 225: the second term at the right-hand side in Eq. (18) should be rxθ˙z instead of rsθz . p. 225: in caption of Fig. 2, change “Go-ordinate” to “Co-ordinate”. p. 226: in Eq. (30), insert the missing term θ y between θx and ψx so that it reads: dr ≡ u, v, θx, θy, ψx, ψy, θz p. 226: in Eq. (31), insert = between {q e} and [C]. p. 226: in Eq. (42), first term in the first parenthesis should read [P˙θx ]T instead of [P˙θz ]T . p. 226: in Eq. (42), first term in the fourth parenthesis should read [P˙θx ]T instead of [P˙θx]T . p. 226: the all letters appeared just after θ in Eq. (43) should be subscript. p. 227: in first column of Table 1: IGGξξ, IGGηη, ξT , ηT should be IGξξ, IGηη, ξT , ηT , respectively. p. 228: 4th line down from the top, change “ξT and ηT ” to “ξT and ηT . p. 228: in Ref. [17], Applcation should be Application. p. 229: 16th and 17th lines down in Notation should combine. p. 229: 2nd line up from the bottom, change ( . ) to ( . ). p. 230: remove the 3rd line down in Appendix B. p. 230: 5th line down in Appendix B, remove 2 and d before A and change η 2 to rη2 so that it reads: IT P = IGP + (rξ2 + rη2)A p. 230: 4th and 6th column headings in Table 4(a) should be IGηη and IT instead of Gηη and IT , respectively. p. 230: in Table 4(a), the polynomial coefficient 1.0423101576e-5 appeared in the column for A(cm2) having no pi should locate as p5 for IT (cm4). p. 230: the column heading except 1st and 5th in Table 4(b) should be ξT , ηT , JG and JGη instead of ξT , ηT , J G6) and JηG, respectively. p. 230: the unit in the 4th column of Table 4(b) should be (cm6) instead of (cm). p. 230: in Table 4(b), to keep the same format for units as in Table 4(a), column headings should have units in the same line. Journal of Engineering The Scientiifc World Journal Hindawi Publishing Corporation ht p:/ www.hindawi.com Journal of Sensors Machinery Hindawi Publishing Corporation International Journal of Hindawi Publishing Corporation ht p:/ www.hindawi.com Antennas and Advances in Civil Engineering Hindawi Publishing Corporation ht p:/ www.hindawi.com Journal of Robotics Hindawi Publishing Corporation ht p:/ www.hindawi.com http://www.hindawi.com VLSI Hindawi Publishing Corporation Navigation and Observation Modelling ulation & Control Science Engineering Electrical and


This is a preview of a remote PDF: http://downloads.hindawi.com/journals/sv/2003/135305.pdf

Bulent Yardimoglu, Daniel J. Inman. Coupled Bending-Bending-Torsion Vibration of a Pre-Twisted Beam with Aerofoil Cross-Section by Finite Element Method, Shock and Vibration, DOI: 10.1155/2003/135305