Application of response surface methodology for optimization of medium components for the production of secondary metabolites by Streptomyces diastatochromogenes KX852460

AMB Express, May 2017

A bioactive strain Streptomyces diastatochromogenes KX852460 was selected for the production of secondary metabolites to control the target spot disease on tobacco leaves, caused by the Rhizoctonia solani AG-3. Peanut meal, soluble starch, NaCl, yeast extract, and ammonium sulphate were identified the best ingredient for high antifungal activity of S. diastatochromogenes KX852460 against the R. solani AG-3. For the improved production of secondary metabolites, central composite design of response surface methodology was applied in submerged fermentation. The best concentrations of ingredients were peanut meal 4.88%, soluble starch 4.40%, NaCl 0.52%, yeast extract 0.47%, and ammonium sulphate 0.0360%. Study of metabolism changes in the submerged fermentation process was analyzed. Level of the reducing sugar increased, as the total sugar consumed. Amino nitrogen and total sugar decrease tendency, which indicated the growth of bacteria in submerged fermentation batch. Production of secondary and other metabolites influenced the pH of the fermentation batch.

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

https://link.springer.com/content/pdf/10.1186%2Fs13568-017-0388-z.pdf

Application of response surface methodology for optimization of medium components for the production of secondary metabolites by Streptomyces diastatochromogenes KX852460

Ahsan et al. AMB Expr Application of response surface methodology for optimization of medium components for the production of secondary metabolites by Streptomyces diastatochromogenes KX852460 Taswar Ahsan 0 2 Jianguang Chen 0 2 Yuanhua Wu 0 2 Muhammad Irfan 1 0 Department of Plant Pathology, Plant Protection College, Shenyang Agricultural University , Shenyang , People's Republic of China 1 Department of Biotechnology, University of Sargodha , Sargodha , Pakistan 2 Department of Plant Pathology, Plant Protection College, Shenyang Agricultural University , Shenyang , People's Republic of China A bioactive strain Streptomyces diastatochromogenes KX852460 was selected for the production of secondary metabolites to control the target spot disease on tobacco leaves, caused by the Rhizoctonia solani AG-3. Peanut meal, soluble starch, NaCl, yeast extract, and ammonium sulphate were identified the best ingredient for high antifungal activity of S. diastatochromogenes KX852460 against the R. solani AG-3. For the improved production of secondary metabolites, central composite design of response surface methodology was applied in submerged fermentation. The best concentrations of ingredients were peanut meal 4.88%, soluble starch 4.40%, NaCl 0.52%, yeast extract 0.47%, and ammonium sulphate 0.0360%. Study of metabolism changes in the submerged fermentation process was analyzed. Level of the reducing sugar increased, as the total sugar consumed. Amino nitrogen and total sugar decrease tendency, which indicated the growth of bacteria in submerged fermentation batch. Production of secondary and other metabolites influenced the pH of the fermentation batch. Streptomyces diastatochromogenes; Bioactive compounds; RSM; Fermentation - Introduction Rhizoctonia solani is the major soil borne pathogen and the causal agent of several kinds of diseases in plants throughout the world, and have destructive impacts on the production of tobacco. In the Liaoning province of China in 2006 target spot disease on tobacco leaves was investigated and analyzed that R. solani AG-3 was the causal agent of this disease (Wu et  al. 2012). Biological control is most potent practice against the R. solani, even though environmental stresses impact on efficacies (dos Reis Almeida et  al. 2007). In agriculture for the disease management of crops, production of ecofriendly agronomic antibiotic from nature is a growing task. Several actinomycetes species are the source of antibiotic (Clardy et  al. 2006). In pharmaceutical products Streptomyces have a big part, and similarly agricultural antibiotics are produce by them (Demain and Sanchez 2009; ElMehalawy et al. 2005). Medium composition and fermentation conditions may cause effects on the production of secondary metabolites from the Streptomyces. In the yield of secondary metabolites these parameters have a key role (Al-Hulu 2013). Minor variations in the composition of fermentation media, can be influenced on the yield and as well as on the metabolic profile of the microbe (Scherlach and Hertweck 2009). By fermentation production of enzymes and growth of microbes, directly related to the medium composition and conditions. Optimization of these parameters became a significant process. To optimize these parameters for the fermentation, several statics approaches are widely utilized (Kumar et  al. 2016). © The Author(s) 2017. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. Optimized nutrient parameters not only cause to boost 20% of the antifungal efficacies, however also understand its composition (Gao et al. 2016). Response surface methodology is very beneficial tool to optimize numerous parameters of trails, to find relativeness among the factors, to find the best combination of parameters and prediction of responses. For the optimization of microbial products this method extensively used (Grahovac et al. 2014; Kong et al. 2014). For the optimization of important fermentation parameters several types of designs are accessible, in optimization process central composite design (CCD) is one of the most useful designs (Nouby et  al. 2009). In current study an effort has been made to produce antibiotic by Streptomyces diastatochromogenes KX852460, using the central composite design of response surface methodology to improve the antifungal activity by optimizing the nutrient components in submerged fermentation. Materials and methods Microorganism Streptomyces strain TA1123 was isolated and identified as Streptomyces diastatochromogenes (GenBank Accession Number KX852460) on the base of morphological, biochemical and 16S ribosomal RNA gene sequence (Ahsan et  al. 2017a) and submitted to Chinese general microbial collection center (CGMCC4.7384) (Ahsan et al. 2017b). R. solani AG-3 (Gene bank accession number of KX852461, Chinese general microbial collection center CGMCC3.18223) was isolated from infected tobacco leaves and identified through molecular techniques (Ahsan et al. 2017b). Inoculum development Inoculum was prepared as described in our earlier reports (Ahsan et  al. 2017b). Briefly, after the development of spores of Streptomyces strain KX852460 on Gause’s synthetic medium agar plates, two spore cakes (5 mm) were used to inoculate the fermentation medium for the production of secondary metabolites. Mode of fermentation Submerged fermentation by S. diastatochromogenes KX852460 was carried out in 250 ml Erlenmeyer flask containing 55 ml of medium. The medium comprised of (g/l) soluble starch 47.0, Yeast extract 3.0, peanut meal 22.0, (NH4)2 SO4 2.7, NaCl 2.7, CaCo3, pH 6.8 was sterilized at 121 °C, 15 lbs for 15 min. After sterilization, the medium was allowed to cool at room temperature and inoculated with 7% suspension of S. diastatochromogenes and incubated at 30  °C with shaking speed of 165  rpm for 96  h. After the completion of fermentation, the culture filtrate was assessed for antifungal activity (Ahsan et al. 2017a). Selection of the most significant fermentation parameters Peanut meal and soluble starch were used as carbon and nitrogen sources, yeast added as additional nutrient, while others were kept at original concentrations. Select the most significant parameters by using the single variable procedure. Other microelements were including NaCl (0, 0.2, 0.4, 0.6, 0.8, 1, 1.2, and 1.4%), ZnSO4 (0, 001, 0.01 and 0.1%), FeSO4 (0, 0.0005, 0.001, 0.0015 and 0.002%), (NH4)2 SO4 (0, 0.2, 0.4, 0.6, 0.8, 1, 1.2 and 1.4%), CuSO4 (0, 0.001, 0.01 and 0.1%), CaCO3 (0, 0.3, 0.6, 0.9, and 1.2%), MgSO4∙7 H2O (0, 0.001, 0.01 and 0.1%), MnCl2 (0, 0.01, 0.02, 0.03 and 0.04%), ZnSO4 (0, 0.001, 0.01 and 0.1%) and KH2PO4 (0, 0.04, 0.08, 0.12 and 0.16), were added each nutrient to the medium, and antifungal activity was determined by oxford cup method, after 96  h of inoculation under shaking at 165 rpm at 30 °C. Experimental design for optimization of nutrient medium In current study a central composite design (CCD) of five-factor-three-level was used, demanding 32 trials. The fractional factorial design comprises of nine factorial points, fourteen center points, and nine axial points with five parameters. The parameters and their levels used for the optimization of fermentation broth for the production of secondary metabolites was: X1: peanut meal (0–12  ml%), X2: soluble starch (0–12%), X3: NaCl (0–1.2%), X4: yeast (0–1.2%), and X5: ammonium sulfate (0.00–0.12%) (Table 1). Contour plots were generated to demonstrate the key and interactive impact between the independent variables and dependent variables. On the base of the ridge maxima analysis and canonical analysis, the optimal mishmash of the factors can be demonstrated, by employing the optimization function of the MINITAB 14 software. In the software response optimizer tool determined the optimal value for maximum antimicrobial activity. Metabolic profile in the fermentation batch Using the dinitrosalicylic acid, reducing sugar in the fermentation batch was measured (Miller 1959) and total sugars were measured by Phenol–sulphuric acid method (Dubois et  al. 1956). Amino nitrogen was determined, using ninhydrin reagent (Vu and Le 2010). pH values of fermentation batch was determined at different interval of time using pH meter. Dry cell weight analysis was done by the method of (Wen et al. 2015). Statistics analysis For the fitted experimental results of RSM, regression method of response surface was used. Coded values represented the variables according to the equation: Xi = Xi − X˙ i /Xi = 1, 2, 3 . . . K, 4 8 4 4 0 12 8 0 4 0 8 4 8 4 0 0 0 4 0 4 4 4 8 −4 0 8 4 4 4 8 8 4 −4 0 4 8 8 4 8 8 4 0 4 0 8 0 4 8 4 4 4 0 4 0 0 4 4 4 8 0 4 Inhibition zone (mm) Residual value Coded values; X1 peanut meal, X2 soluble starch, X3 NaCl, X4 yeast, X5 ammonium sulphate where xi is an independent variable coded value, Xi is the independent variable’s real value, X is the independent variable’s real mean, and Xi is the step change value. The second-order polynomial model was fitted a response curve fitting the equation; Y = b0 + j bij xi xj + bii xi, (2) where Y is stand for measurement of response; the intercept term indicated by b0; bi, bij and bii are measures of the effects of variables xi, xixj and xi respectively. The variable xixj represents the first-order interaction between xi and xj (i < j). Analysis of variance (ANOVA) was used for the statistical analysis of the model, that comprising of the Fisher’s F-test, associated probability P(F), determination coefficient R2 and correlation coefficient R that measures the goodness of fit regression model. The analysis also included Student’s t-value for the estimated coefficients and associated probabilities, P(t). For each variable, the quadratic models were represented as contour plots (Gao et  al. 2016; Ahsan et  al. 2017a). Results Effect of carbon, nitrogen and microelement sources on antifungal activity of Strain KX852460 Peanut meal, wheat bran, soya bean meal and soluble starch were used as carbon and nitrogen source. Effects of concentrations of these carbon and nitrogen sources in the medium on the antifungal activity were determined. By increasing the concentrations of peanut meal and soluble starch from 0 to 14%, the diameter of inhibition zone increased (Fig.  1a, d), while the antifungal effects of wheat bran and soya bean meal were not significant. Increasing the concentrations of wheat bran and soya bean meal from 0 to 14%, the diameter of inhibition zone was observed not increased as compared to peanut meal and soluble starch (Fig. 1b, c). Yeast extract and peptone were added in the medium as additional nutrients. Yeast extract had significant antifungal effects, as the concentration increased from 0 to 1.6% (Fig.  2a). While the peptone was investigated with the same concentration and results showed not too much influenced on antifungal activity (Fig.  2b). Four microelements were screened for the maximum production of antibiotic, to the disease management of target spot on tobacco leaf and suppressing the pathogen R. solani AG-3. Ammonium sulfate, calcium carbonate, sodium chloride, and magnesium sulphate with same concentration of each ranges from 0 to 1.4%. Ammonium sulfate and sodium chloride had significant effects on the antifungal activity of strain KX852460 (Fig. 3a, c). Calcium carbonate and magnesium sulphate had no significant effects on the antifungal activity against R. solani AG-3 by the strain KX852460 (Fig. 3b, d). On the base of results and keeping in view the cost of the experiment, following nutrients i.e. peanut meal, soluble starch, yeast extract, sodium chloride, and ammonium sulphate were screened for the optimization of fermentation medium. Optimization of fermentation medium through CCD The antifungal effects of antibiotic, produced by S. diastatochromogenes KX852460 were maximized by optimization of the medium components through central composite design (CCD) of response surface Fig. 2 Antifungal effects of supplement compounds at different concentration against the R. solani AG-3, other nutrients kept at their original concentrations. a Yeast extract, and b peptone methodology. Thirty-two experiments were conducted in triplicate with different concentrations of Peanut meal, soluble starch, NaCl, yeast extract and ammonium sulfate (Table  1). The response obtained from experiments of central composite design (Table  2) were calculated with second order polynomial multiple regression Eq. 3. Antifungal activity (Y) = −2.44 + 2.129X1 + 2.400X2 + 29.46X3 + 43.13X4 + 375.2X5 − 0.1988X12 − 0.1840X22 − 28.22X32 − 30.71X42 − 1778X52 + 0.0834X1X2 − 15.25X1X5 − 1.319X2X4 − 15.06X2X5 − 228.7X4X5 where Y is the response (antibiotic activity); and X1, X2, X3, X4 and X5 are the coded values of the independent factors, viz., Peanut flour, soluble starch, NaCl, yeast and ammonium sulfate respectively. Analysis of variance (ANOVA) was performed on data collected from experiments as shown in the Table  3. The proposed model for this study was found significant having Fischer test value of 39.21 and P value of 0.000. The coefficient of determination R2 showed the appropriateness of the adequate model. R2 values also determined the trail parameters, their interaction and showed unpredictability in the response. In this study coefficient determination R2  =  0.9735 or 97.35% Table 2 Analysis of variance of antifungal activity indicated that about 2.65% variations were not determined by the model. The adjusted determination coefficient R2 = 0.9487 or 94.87% also showed that the model was highly significant. All the linear term regression coefficients showed great impact on the antibiotic activity according to the significance of corresponding p-values [pX1  =  0.022, pX2  =  (0.022), pX3  =  (0.000), pX4  =  (0.001), and pX5  =  (0.067)]. Peanut flour, soluble starch, NaCl, yeast and ammonium sulfate showed their great effect during the activity of the antibiotic. Quadric coefficient of X11, X22, X33, X44, and X55 were significant and negative effect of these quadrants determined that amplifying the activity of the antibiotic as the parameter’s values enlarged and decreased as the parameter values increased above from certain values. Interactive terms coefficients of X12, X15, X24, and X45 were significant. Predicted and actual values of the medium and zone of inhibition against the fungus were given in the (Fig. 4). Regression models generated surface plots to determine the impact of independent variables and interactive effect of each variable. Signification of variables directly related to the shape of each surface plot that the reciprocal interactions among the independent variables. Figures  5a–f, 6a–d shown the activity for each pair of variables and kept the others constant at their middle values. Metabolism of Streptomyces diastatochromogenes KX852460 during fermentation in shaking flasks During the fermentation process evaluation of total sugar, reducing sugar, amino nitrogen, pH and dry mycelium weight was done The total sugar was utilized; at initial stages the concentration of total sugar was high, within the time utilization of total sugar was increased and concentration of total sugar was decreased. At initial stages, the consumption was low, as the total sugar was utilized gradually, concentration of reducing sugar increased, and after 96  h decreased abruptly. Amino nitrogen level was up and down, while pH values was also not stable and remained between 5.5 and 6.6 in the whole process of fermentation. Dry mycelium weight was increased within the hours of fermentation process, after 84 h the weight of dry mycelium was highest, while it became decreased after 120 h of fermentation (Table 4). Discussion For the production of antibiotics from the microbes, microelements are very crucial. Several phenomenons including physiologically and synthetically were affected by the concentrations of microelements (Cao and Ma 2002). On the base of antifungal activity against the R. solani AG-3, peanut meal and soluble starch were selected for the optimized carbon and nitrogen source for the production of antibiotic in the fermentation medium respectively. Several studies revealed that growth and bioactivity of microbe were greatly affected by the constitution of the substrate medium, such as carbon, nitrogen sources and inorganic microelements (Purama and Goyal 2008; Rao et  al. 2007; Song et  al. 2007). Current study reveals that yeast extract and peptone had impact on the activity of antibiotic against the R. solani AG-3. In the complex fermentation composition yeast extract and peptone had great influence on the production of actinorhodin by Streptomyces coelicolor A3 (2) (Elibol 2004). To find optimize parameters response surface methodology is suitable mathematical and statistical tool; it can be helpful to find experimental design for illuminating the relations between the different parameters. Recently RSM was used extensively to optimize fermentation parameters (Bankar and Singhal 2010; Purama and Goyal 2008; Song et  al. 2007). Later total sugar, reducing sugar and amino nitrogen level in the fermentation batch decreased, while at the same time growth of bacteria increased. As the total sugar, reducing sugar, and amino nitrogen consumed by the Streptomyces strain. The rate of growth of Streptomyces strain was declined due to accumulation of secondary metabolites and other metabolites in fermentation batch and pH became decreased. By the utilization of total sugar, the level of reducing sugar decreased, positively effect on pH value and negatively effect on the dry mycelium that led to increase the synthesis of fermentation product (Li et  al. 2002). S. diastatochromogenes KX852460 had good antifungal effects against the R. solani AG-3 to combat the target spot disease on tobacco leaves. Peanut meal, soluble starch, NaCl, yeast extract, and ammonium sulphate were optimized ingredients for the high antifungal activity of secondary metabolites. This product could be good fungicide for the biological disease management of target spot and other R. solani related disease. Table 3 Coded coefficients for antifungal activity Culture time (h) Total sugar (mg/ml) Reducing sugar (mg/ml) Amino nitrogen (mg/ml) Dry mycelium weight (mg/ml) Abbreviations RSM: response surface methodology; CCD: central composite design; CGMCC: Chinese general microbial culture collection. Authors’ contributions Planning and designing of study: YW; Experimentation: TA; Result Analysis: JC, Manuscript Drafting and literature survey: MI. All authors contributed in the final approval of manuscript. All authors read and approved the final manuscript. Acknowledgements The authors are thankful to the technical staff of the Department of Plant Pathology, College Plant Protection, Shenyang Agricultural University, P. R. China. Competing interests The authors declare that they have no competing interests. Availability of data and materials Data regarding microbe is available in public database like NCBI and CGMCC. Ethical approval No data was used in this article which needs approval. Funding This study is supported by Project Number 183/2010 from Liaoning research center of tobacco China. Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Ahsan T , Chen J , Wu Y , Irfan M , Shafi J ( 2017a ) Screening, identification, optimization of fermentation conditions, and extraction of secondary metabolites for the biocontrol of Rhizoctonia Solani AG-3. Biotechnol Biotechnol Equip 31 : 1 - 8 . doi:10.1080/13102818.2016.1259016 Ahsan T , Chen J , Zhao X , Irfan M , Wu Y ( 2017b ) Extraction and identification of bioactive compounds (Eicosane and Dibutyl phthalate) produced by Streptomyces strain KX852460 for the biological control of Rhizoctonia solani AG-3 strain KX852461 to control target spot disease in tobacco leaf . AMB Expr 7 : 54 . doi:10.1186/s13568- 017 - 0351 -z Al-Hulu S ( 2013 ) Study effects of some parameters on antifungal activity for Streptomyces spp . J Kerbala Uni 11 : 3 Bankar SB , Singhal RS ( 2010 ) Optimization of poly-ε-lysine production by Streptomyces noursei NRRL 5126 . Biores Technol 101 : 8370 - 8375 . doi:10.1016/j. biortech. 2010 .06.004 Cao J , Ma H ( 2002 ) Microbial engineering . Science Press, Beijing Clardy J , Fischbach MA , Walsh CT ( 2006 ) New antibiotics from bacterial natural products . Nat Biotechnol 24 : 1541 - 1550 . doi:10.1038/nbt1266 Demain AL , Sanchez S ( 2009 ) Microbial drug discovery, 80 years of progress . J Antibiot 62 : 5 - 16 . doi:10.1038/ja.2008.16 dos Reis Almeida FB , Cerqueira FM , do Nascimento Silva R , Ulhoa CJ , Lima AL ( 2007 ) Mycoparasitism studies of Trichoderma harzianum strains against Rhizoctonia solani: evaluation of coiling and hydrolytic enzyme production . Biotechnol Lett 2 : 1189 - 1193 . doi:10.1007/s10529- 007 - 9372 -z Dubois M , Gilles KA , Hamilton JK , Rebers PA , Smith F ( 1956 ) Colorimetric method for determination of sugars and related substances . Anal Chem 28 : 350 - 356 Elibol M ( 2004 ) Optimization of medium composition for actinorhodin production by Streptomyces coelicolor A3 (2) with response surface methodology . Proc Biochem 39 : 1057 - 1062 . doi:10.1016/s0032-9592(03)00232- 2 El-Mehalawy AA , Abd-Allah N , Mohammed R , Abu-Shady M ( 2005 ) Actinomycetes antagonizing plant and human pathogenic fungi, II. Factors affecting antifungal production and chemical characterization ofthe active components . Int J Agric Biol 7 : 188 - 196 Gao X , He Q , Jiang Y , Huang L ( 2016 ) Optimization of nutrient and fermentation parameters for antifungal activity by Streptomyces lavendulae Xjy and its biocontrol efficacies against Fulvia fulva and Botryosphaeria dothidea . J Phytopathol 164 : 155 - 165 . doi:10.1111/jph.12440 Grahovac J , Grahovac M , Dodić J , Bajić B , Balaž J ( 2014 ) Optimization of cultivation medium for enhanced production of antifungal metabolites by Streptomyces hygroscopicus . Crop Prot 65 : 143 - 152 . doi:10.1016/j. cropro. 2014 .07.020 Kong Y , Zou P , Miao L , Qi J , Song L , Zhu L ( 2014 ) Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp . HJC-D1 using response surface methodology . Environ Sci Pollut Res 21 : 5983 - 5990 . doi:10.1007/s11356- 014 - 2532 -5 Kumar M , Singh A , Beniwal V , Salar RK ( 2016 ) Improved production of tannase by Klebsiella pneumoniae . AMB Expr 6 : 1 - 11 . doi:10.1186/ S13568- 016 - 0217 -9 Li XM , Li Y , Li PR ( 2002 ) The relations among reducing sugar, pH, dry weight of mycelium and production during the liquid fermentation of Marasmius androsaceus” . Edible Fungi China 21 : 37 - 38 Miller GL ( 1959 ) Use of dinitrosalicylic acid reagent for determination of reducing sugar . Anal Chem 31 : 426 - 428 . doi:10.3181/ 00379727 - 20 - 47 Nouby M , Mathivanan D , Srinivasan K ( 2009 ) A combined approach of complex eigenvalue analysis and design of experiments (DOE) to study disc brake squeal . Int J Eng Sci Tech 1 : 254 - 271 . doi:10.4314/Ijest.v1I1.58084 Purama RK , Goyal A ( 2008 ) Screening and optimization of nutritional factors for higher dextransucrase production by Leuconostocmesenteroides NRRL B-640 using statistical approach . Biores Technol 99 : 7108 - 7114 . doi:10.1016/j.biortech. 2008 .01.032 Rao YK , Tsay K-J , Wu W-S , Tzeng Y-M ( 2007 ) Medium optimization of carbon and nitrogen sources for the production of spores from Bacillus amyloliquefaciens B128 using response surface methodology . Proc Biochem 42 : 535 - 541 . doi:10.1016/j.procbio. 2006 .10.007 Scherlach K , Hertweck C ( 2009 ) Triggering cryptic natural product biosynthesis in microorganisms . Org Biomol Chem 7 : 1753 - 1760 . doi:10.1039/ b821578b Song X , Zhang X , Kuang C , Zhu L , Guo N ( 2007 ) Optimization of fermentation parameters for the biomass and DHA production of Schizochytrium limacinum OUC88 using response surface methodology . Proc Biochem 42 : 1391 - 1397 . doi:10.1016/j.probio. 2007 .07.014 Vu T , Le V ( 2010 ) Using fed-batch fermentation in high-gravity brewing: effects of nutritional supplementation on yeast fermentation performance . Int Food Res J 17 : 117 - 126 Wen Z , Liu Z , Hou Y , Liu C , Gao F , Zheng Y , Chen F ( 2015 ) Ethanol induced astaxanthin accumulation and transcriptional expression of carotenogenic genes in Haematococcus pluvialis . Enzyme Microb Technol 78 : 10 - 17 . doi:10.1016/J.enzmictec. 2015 .06.010 Wu YH , Zhao YQ , Fu Y , Zhao XX , Chen JG ( 2012 ) First report of target spot of flue-cured tobacco caused by Rhizoctonia solani AG-3 in China . Plant Dis 96 : 1824 . doi:10.1094/pdis- 06 - 12 - 0551 .pd4


This is a preview of a remote PDF: https://link.springer.com/content/pdf/10.1186%2Fs13568-017-0388-z.pdf

Taswar Ahsan, Jianguang Chen, Yuanhua Wu, Muhammad Irfan. Application of response surface methodology for optimization of medium components for the production of secondary metabolites by Streptomyces diastatochromogenes KX852460, AMB Express, 2017, DOI: 10.1186/s13568-017-0388-z