A PDF file should load here. If you do not see its contents
the file may be temporarily unavailable at the journal website
or you do not have a PDF plug-in installed and enabled in your browser.
Alternatively, you can download the file locally and open with any standalone PDF reader:
Erratum to: Mitigation of Intergranular Stress Corrosion Cracking in Al–Mg by Electrochemical Potential Control
Erratum to: Mitigation of Intergranular Stress Corrosion Cracking in Al-Mg by Electrochemical Potential Control
0 1.-Department of Materials Science and Engineering, Center for Electrochemical Science and Engineering, University of Virginia , Charlottesville, VA 22904, USA. 2.- , USA
The highlighted values in Table I pertaining to the corrected test in 0.6 M NaCl at 0.8 VSCE pertain to the data shown in Fig. 2 and are illustrated graphically in Fig. 3. These corrected KTH and da/dtII values should be considered by the reader when reading pertinent ''Results'' and ''Discussion'' sections, which will further support conclusions drawn in this publication.
,1,2 J.R. SCULLY,1 and J.T. BURNS1
L E F M
0.6 M NaCl
The online version of the original article can be found under doi:10.1007/
Mitigation of Intergranular Stress Corrosion Cracking in Al–Mg by Electrochemical Potential