Erratum to: Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt

JOM, Aug 2017

H. P. Tang, J. Ma, J. Z. Wang, C. L. Li

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

https://link.springer.com/content/pdf/10.1007%2Fs11837-017-2543-z.pdf

Erratum to: Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt

Erratum to: JOM Erratum to: Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt H.P. TANG 0 J. MA 0 J.Z. WANG 0 C.L. LI 0 0 1.-State Key Laboratory of Porous Metal Materials, Northwest Institute for Nonferrous Metal Research , Xi'an 710016 , China. 2.-School of Materials and Metallurgy, Northeastern University , Shenyang 110819, China. 3.- The images for Fig. 5 were inadvertently transposed during production. They are given below with the proper labeling. Fig. 5. Number and size of sintered joints in fiber felt samples sintered (a) without pre-annealing and (b) with pre-annealing at 850 C for 30 min.


This is a preview of a remote PDF: https://link.springer.com/content/pdf/10.1007%2Fs11837-017-2543-z.pdf

H. P. Tang, J. Ma, J. Z. Wang, C. L. Li. Erratum to: Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt, JOM, 2017, 1-1, DOI: 10.1007/s11837-017-2543-z