Correction to: Laser Additive Manufacturing of Magnetic Materials

JOM, Oct 2017

In the published version of this paper, there is an error in the indexing of the fcc diffraction pattern in Fig. 5c. The corrected figure is shown below.

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

https://link.springer.com/content/pdf/10.1007%2Fs11837-017-2623-0.pdf

Correction to: Laser Additive Manufacturing of Magnetic Materials

Correction to: JOM Correction to: Laser Additive Manufacturing of Magnetic Materials 0 1.-Department of Materials Science and Engineering, University of North Texas , Denton, TX 76201 , USA. 2.-School of Materials Science and Engineering, Nanyang Technological University , Singapore 639798 , Singapore. 3.-Department of Mechanical Engineering, Cleveland State University , Cleveland, OH 44115 , USA. 4.-Center for Advanced Research and Technology, University of North Texas , Denton, TX 76201, USA. 5.-FCA/UNICAMP, Limeira, SP CEP 13484-350, Brazil. 6.- - In the published version of this paper, there is an error in the indexing of the fcc diffraction pattern in Fig. 5c. The corrected figure is shown below (Fig. 5). The online version of the original article can be found under doi:10.1007/ s11837-017-2257-2. (a) Ni-Fe-Mo 10 μm 10 μm (111) (111) (002) 100 nm Ni-Fe-V Ni-Fe-Mo [011]fcc [011]fcc 100 nm


This is a preview of a remote PDF: https://link.springer.com/content/pdf/10.1007%2Fs11837-017-2623-0.pdf

C. V. Mikler, V. Chaudhary, T. Borkar, V. Soni, D. Jaeger, X. Chen, R. Contieri, R. V. Ramanujan, R. Banerjee. Correction to: Laser Additive Manufacturing of Magnetic Materials, JOM, 2017, 1-2, DOI: 10.1007/s11837-017-2623-0