2018 JOM and JEM Best Paper Awards; TMS Members Inducted into NAI; TMS Welcomes New Members

JOM, Feb 2018

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

https://link.springer.com/content/pdf/10.1007%2Fs11837-018-2755-x.pdf

2018 JOM and JEM Best Paper Awards; TMS Members Inducted into NAI; TMS Welcomes New Members

JOM 2018 JOM and JEM Best Paper Awards; TMS Members Inducted into NAI; TMS Welcomes New Members TMS Divisions Announce 0 1 2 3 4 5 6 7 8 9 10 11 12 13 JEM Award Recipients 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Best Paper 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 Lynne Robinson, JOM Magazine Editor , at 1 The TMS Light Metals Division (LMD) and Structural Materials Division (SMD) will present their 2018 JOM Best Paper Awards during their respective division luncheons at the TMS 2018 Annual Meeting & Exhibition , TMS2018 2 Zheng, Liang; Beijing Institute of Aeronautical Materials , China 3 Simmons, Jeff P.; US Airforce Research Laboratory , United States 4 Zhang , Xueyuan; Gamry Instruments , United States 5 Sietins, Jennifer; Army Research Laboratory , United States 6 Shao, Shuai; Louisiana State University , United States 7 Yumak, Tugrul; West Virginia University , United States 8 Yashima Masatomo, Tokyo Institute of Technology , Japan 9 Yan, Ping; China Iron & Steel Research , China 10 Wright, Karen; Idaho National University , United States 11 Walker, Jason; Youngstown State University , United States 12 Tiley , Jaimie S.; Afoser , United States 13 Stan, Liliana; Argonne National Laboratory , United States Share the good news about your professional accomplishments! Contact that only news submitted by current TMS members will be considered. - JO TMS Members Inducted into the National Academy of Inventors M. Parans Paranthaman Richard W. Siegel Diran Apelian Zhigang Z. Fang Mark C. Hersam Chemistry at the Chemical Sciences Division at the Oak Ridge National Laboratory (ORNL), and has been an active TMS member since 1993. Richard W. Siegel is the Robert W. Hunt Professor of Materials Science and Engineering at the Rensselaer Polytechnic Institute. An active TMS member since 1992, he has authored or coauthored more than 300 articles and patents, edited ten books, and presented more than 500 invited lectures around the world. The goal of NAI is to recognize inventors who have created patents that enhance the visibility of academic technology and innovation, encourage the disclosure of intellectual property, and educate and mentor innovative students. The rank of Fellow is the highest honor that NAI confers. TMS congratulates the following members for being inducted as Fellows into the National Academy of Inventors (NAI). They will be formally recognized at a ceremony slated for April 5, 2018 in Washington, D.C. Diran Apelian is the AlcoaHowmet Professor of Mechanical Engineering at Worcester Polytechnic Institute (WPI) and the founding director of WPI’s Metal Processing Institute. He was the 2008 TMS President and a 2006 TMS Fellow, and has received the TMS Bruce Chalmers Award and delivered the 2004 TMS/ASM Distinguished Lecture in Materials and Society, among his many awards and honors. Zhigang Z. Fang is a professor at the University of Utah. A TMS member since 1992, he has authored/co-authored more than 120 publications and holds more than 30 U.S. patents. Mark C. Hersam is the Walter P. Murphy Professor of Materials Science and Engineering at Northwestern University and Director of the Northwestern University Materials Research Center. He is the recipient of the 2006 AIME Robert Lansing Hardy Award and a 2014 recipient of a MacArthur Fellowship. M. Parans Paranthaman is a Corporate Fellow and a Group Leader of Materials TMS Welcomes New Members The TMS Board of Directors approved professional membership for the following individuals at its December 2017 meeting. Please join us in congratulating and welcoming them to all the privileges and benefits of TMS membership. Ahmad, Iftikhar; Lambada Technologies, United States Alsahli, Abdulmohsen; Saudi Basic Industries Corp. (Sabic), Saudi Arabia Anderson, Kenneth R.; Naval Nuclear Laboratory, United States Arthur, Nana K.; Council for Scientific and Industrial Research, South Africa Arvisais, Jean-Paul; Aluminerie Alouette Inc., Canada Azadfar, Mohammadali; Washington State University, United States Baake, Egbert; Leibniz University of Hannover, Germany Bakas, Michael P.; Army Research Office, United States Balogun, Yunusa A.; NSWC Crane Division, United States Bamiduro, Olu; Solar Way Solutions, United States Beaman, Joseph J.; University of Texas at Austin, United States Becerra, Ana Maria; Hatch, Canada Bellot, Jean-Pierre; Lorraine University, France Bermingham, Michael; The University of Queensland, Australia Berube, Jean-Pierre; Aluminerie Alouette Inc., Canada Bianculli, Steven R.; United States Steel, United States Bing, Ni; Central Iron and Steel Research Institute, China Bishop-Moser, Joshua; Mforesight, United States Bjorkman, Bo M.; Lulea University of Technology, Sweden Bolduc, Emile; Rio Tinto – Jonquiere Works, Canada Bouhabila, El Hani; Solios Environment SA, France Bourdon, Annie; Aluminerie Alouette Inc., Canada Braeuhaus, Dennis; Heraeus Quarzglas, Germany Brisson, Pierre-Yves, Rio Tinto Aluminium, Canada Bristow, James; NOVA Geotechnical & Inspection Services PLLC, United States Brush, Lucien N.; University of Washington, United States Bryan, David; ATI Specialty Material, United States Burns, Madison; Baker Hughes, Germany Campbell, Geoffrey H.; Lawerence Livermore National Laboratory, United States Camperlingo, Flavio Eduardo; Petrocoque S/A, Brazil Caspers, Christopher; Federal-Mogul, United States Chalmers, Ian; Alkane Resources Ltd, Australia Chen, Aiping; Los Alamos National Laboratory, United States Chen, Wei; Northwestern University, United States Chowdhri, Abhinav; Supreme Special Steels, India Christman, Brett A.; Naval Nuclear Laboratory, United States Cibula, Matthew A.; Ampere Scientific, United States Couvrat, Mathieu; Manoir Pitres, France Cuevas, Fermin; ICMPE – CNRS, France Dai, Chen; VJ Technologies, United States D’Amore, Lisa L.; BMPC/Knolls Atomic Power Laboratory, United States De Neufville, John; Eutectix, United States Debruin, Mark E.; Skuld LLC, United States Dechent, Matthias; Trimet Aluminium SE, Germany Deng, Xin; University of Science & Technology Liaoning, China Depond, Philip; Lawrence Livermore National Laboratory, United States Dolok Saribu, Wallter Z.; PT Indonesia Asahan Alum (PERSERO), Indonesia Dong, Yanwu; Northeastern University, China Drake, Michael; PCC Structurals, United States Dubelman, Meredith; GE Additive, United States Duvernay, Amélie; Five Solios, France Eggert, Roderick; Colorado School of Mines, United States Eickoff, Moritz; RWTH Aachen University, Germany Ekiert, Thomas; Riverside Research, United States Engler-Pinto, Carlos C.; Ford Motor Company, United States Enright, Phil; N-Tec Limited, United Kingdom Evans, David G.; Special Metals Corp., United States Everett, David D.; Strohecker Inc., United States Faltens, Tanya; Nanohub/Purdue University, United States Ferguson, Gehn; U.S. Army Research Laboratory, United States Ferrer, Laurent; SAFRAN, France Fezi, Kyle; Fort Wayne Metals, United States Fu, Engang; Peking University, China Gao, Jianrong; Northeastern University, China Gavras, Sarkis; Magic, Helmholtz Zentrum Geesthacht, Germany Gazanion, Fabienne; Rio Tinto, Canada Geng, Xin; Northeastern University, China Gingras, Catherine; Rio Tinto, Canada Gockel, Brian; U.S. Air Force, United States Graham, Joseph; Missouri University of Science and Technology, United States Griffith, David; Global Advanced Metals, United States Gruber, Jason A.; Naval Nuclear Laboratory, United States Gu, Yejun; Johns Hopkins University, United States Guidoin, Robert; Laval University, Canada Guo, Juchen; University of California Riverside, United States Haghshenas, Meysam; University of North Dakota, United States Hans, Stephane; Aubert & Duval, France Hansén, Thorbjörn; Swerea MEFOS AB, Sweden Harris, Karen E.; Vitro Architectural Glass, United States Hartmann, Thomas; Vacuumschmelze, Germany Hassani, Mostafa; Massachusetts Institute of Technology, United States Hatch, Gareth; Innovation Metals Corp., Canada He, Fei; Avery Dennison, United States He, Zhijun; University of Science and Technology Liaoning, China Hemeryck, Romain; Five Solios, France Hensgen, Lars; Tribotecc GmbH, Austria Horn, Tim; North Carolina State University, United States Hoseinian Yousef, Taymaz; Norsk Hydro ASA, Norway Hulbert, Leland; BMPC, United States Humphreys, Colin; University of Cambridge, United Kingdom Jagdale, Vijay; United Technologies Research Center, United States Jain, Vaibhav; Defense Logistics Agency, United States Jardy, Alain; CNRS/LabEx DAMAS, France Jiang, Zhouhua; Northeastern University, China Kaku(Hao), Kyo(Jing); MC Zhenjiang Anode Solutions Co., Ltd, China Karimi Sibaki, Ebrahim; University of Leoben, Austria, Austria Kashar, Lawrence; Kashar Technical Services, Inc., United States Ke, Yucheng; China Keles, Ozgur; San Jose State University, United States Kelley, Douglas; University of Rochester, United States Kennedy, James C.; Three Consulting, United States Kharicha, Abdellah; Montauniversität, Austria Kim, Dae Hyun; SeAH, South Korea Kim, Jinkyung; Postech, South Korea King, Paul E.; Ampere Scientific, United States Kish, Joseph; McMaster University, Canada Koch, Ralf; Vacuumschmelze GmbH & Co. KG, Germany Kornecki, Michael; U.S. Army Research Laboratory, United States Kraly, Andreas; Lkr Leichtmetallkompetenzzentrum Ranshofen, Austria Kruz, Andrew; U.S. Army, United States Kubin, Michael; INTECO Melting and Casting, Austria Kui, Wang; MC Zhenjiang Anode Solutions Co., China Kurose, Ryo; Daido Steel America Inc., United States Kwon, Soon Il; Republic of Korea, South Korea Laflamme, François; Aluminerie Alouette Inc., Canada Lafrance, Jacques; Aluminerie Alouette Inc., Canada Lagace, Charles; Aluminerie Alouette Inc., Canada Lauzon, Julien; Alcoa, Canada Lavergne, Francis-Joe, Alcoa, Canada Lejeune, Zorabel M.; Oxbow Calcining LLC, United States Leon, Marco F.; Universidad San Fancisco De Quito, Ecuador Leonard, Guillaume; Rio Tinto Alcan – ARDC, Canada Leonard, Eric L.; Elemental Metals, United States Leon-Brito, Neliza; Los Alamos National Laboratory, United States Leskovec, Simon; SIJ Metal Ravne, Slovenia Levey, Christophe G.; Thayer Engineering at Dartmouth, United States Levkov, Leonid; JSC “RPA CNITMASH,” Russian Federation Li, Jing; University of Science & Technology Beijing, China Li, Juntao; China Iron & Steel Research, China Li, Maosheng; IAPCM, China Li, Wanming; Northeastern University, China Li, Wenxian; Shanghai University, China Li, Yang; Northeastern University, China Lim, Mary Lyn; PPG, United States Lippard, Henry E.; ATI Allvac, United States Lister, Michael; Flowserve, United States Litzelman, Scott J.; United States Liu, Fubin; Northeastern University, China Liu, Zhonggiu; Northeastern University, China Low, Rachael, Solar Turbines Inc.; United States Lu, Haiyan; Institute of Materials China, China Machaka, Ronald; Council for Scientific and Industrial Research, South Africa Mahmoud, Morsi Mohamed; King Fahd University of Petroleum, Saudi Arabia Maiorov, Boris; Los Alamos National Laboratory, United States McCarthy, Ben; Morgan Advanced Materials, United Kingdom McCurley, Peyton C.; Oxbow Calcining LLC, United States McDonald, Neill; MetaFensch, France Mckinnell, Jim; HP Inc., United States Mcmillen, Mark, PPG Industries, United States Merriman, Colin C.; Washington State University, United States Michelhaugh, Richard T.; Department of Energy, United States Moll, Amy J.; Boise State University, United States Morissette, Francois; Rio Tinto, Canada Motoyasu, Genjiro; Chiba Institute of Technology, Japan Moyer, Bruce; Oak Ridge National Laboratory, United States Moyer, Laura E.; Lehigh University, United States Mubarok, Arif; PPG, United States Nair, Bindu G.; University of Birmingham, United Kingdom Nasir, Tanzim; Acuren Group Inc., Canada Nulwala, Hunaid; Liquid Ion Solutions, United States Oh, Sanghun; SeAh Changwon Integrated Special Steel, South Korea Oppedal, Andrew L.; Mississippi State University, United States Otminski, Jordan; Ledvance, United States Ottesen, Petur; Nordural, Iceland Pappula, Laxminaray; Osmania University, India Pavlina, Erik J.; AK Steel Corporation, United States Pintowantor, Sungging; Institut Teknologi Sepuluh, Indonesia Powell, Shane; Universal Stainless, United States Raghunathan, Narsimhan; Touchstone Testing Lab LLC, United States Rainville, Kathia; Rio Tinto, Canada Rajagopalan, Sudhir; Siemens Power Generation, United States Raju, Selva; Army Research Laboratory, United States Raub, Joseph N.; Century Aluminum, United States Reynolds, William T.; Virginia Polytechnic Institute and State University, United States Rock, Christophe D.; Center of Additive Manufacturing & Logistics, United States Rodek, Eugene; SPI Supplies, United States Roudant, Julien; ECM USA, United States Roy, Rose; Xtalic Corporation, United States Ruppert, Jean; Safran, France Salesse, Julie; Aluminerie Alouette Inc., Canada Samant, Rutuja; EWI, United States Sands, Thomas M.; Carpenter Technology Corporation, United States Sato, Takashi; Japan Casting and Forging, Japan Saylor, David A.; USFDA, United States Scheriau, Alexander; INTECO Melting and Casting, Austria Shaarawi, Mohamme; Hewlett Packard, United States Shapter, Joe; Flinders University, Australia Silva, Neilon; Petrobras, Brasil Singh, Raman P.; Oklahoma State University, United States Smathers, David B.; HC Starck, United States Stanciu, Lia A.; Purdue University, United States Stehulak, Elizabeth H.; Fort Wayne Metals, United States Sumardiansy, Eko; PT Indonesia Asahan Alum, Indonesia Tang, Chun; University of Nevada, Las Vegas, United States Tang, Fei; DNV GL, United States Thompson, Sean R.; U.S. Army Amdec, United States Vader, Scott J.; Vader Systems LLC; United Sates Valencia, Nick C.; Arrowhead Products, United States Wais, Miachael; SLM Solutions, United States Wakefield, Robert; Outotec, Canada Wang Dong; Xi’an Jiatong University, China Wang, Peisheng; NIST, United States Wei, Gong; Northeastern University, China Yilong, Pu; Jiangsu Longda Group, China Zang, Ximin; University of Technology & Science Liaoning, China Zhong, Yulin; Griffith University, Australia


This is a preview of a remote PDF: https://link.springer.com/content/pdf/10.1007%2Fs11837-018-2755-x.pdf

2018 JOM and JEM Best Paper Awards; TMS Members Inducted into NAI; TMS Welcomes New Members, JOM, 2018, 250-254, DOI: 10.1007/s11837-018-2755-x