The nuclear data program at rensselaer

EPJ Web of Conferences, Jan 2010

The nuclear data program at the Rensselaer Polytechnic Institute (RPI) is centered around a 60 MeV pulsed electron Linear Accelerator (LINAC) configured to deliver pulsed neutron beams. The LINAC electron pulse width can vary between 5 ns and 5 us, a repetition rate of 1–500 pulses per second and neutron yield of up to 1013 n/s. Over the years several experimental setups and techniques were developed to enable a variety of measurement capabilities. The experiments cover the energy range from 0.001 eV to 20 MeV and included neutron transmission, capture, scattering and fission measurements. The facility is also equipped with a Lead Slowing-Down Spectrometer (LSDS) producing a high neutron flux that is used for simultaneous measurements of the fission cross section and fission fragment mass and energy distributions. Detectors for (n, alpha) and (n, p) cross section measurements using the LSDS were also developed and measurements of (n, alpha) cross section were completed. The high neutron flux inside the LSDS enables measurements on small samples (sub micrograms) or samples with small cross section (sub millibarns).In order to fully utilize the capabilities of the facility, several measurement techniques were developed; high accuracy (<1%) total cross sections were measured using iron and uranium filtered neutron beams. A system for fast neutron scattering measurements using an array of liquid scintillators and a digital data acquisition system was recently developed and used for several measurements and is now being adapted for fission neutron studies.Methods for simultaneous measurements of fission and capture cross sections using the RPI multiplicity detector are under development and new modular detectors for both fast and resonance region neutron detection were developed and deployed.These developments result in numerous measurements on different materials and provide input to improved evaluated nuclear data libraries and thus help improve the accuracy of calculations of nuclear reactors and other nuclear systems.

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

https://www.epj-conferences.org/articles/epjconf/pdf/2010/07/epjconf_efnudat2010_05001.pdf

The nuclear data program at rensselaer

EPJ Web of Conferences The nuclear data program at rensselaer Y. Danon 1 Z. Blain 1 R. Bahran 1 M. Rapp 1 J. Thompson 1 D. Williams 1 G. Leinweber 0 D. Barry 0 R. Block 0 J. Hoole 0 0 Bechtel Marine Propulsion Corporation, Knolls Atomic Power Laboratory , PO Box 1072, Schenectady, New York 12301-1072 , USA 1 Rensselaer Polytechnic Institute , Troy, NY 12180 , USA The nuclear data program at the Rensselaer Polytechnic Institute (RPI) is centered around a 60 MeV pulsed electron Linear Accelerator (LINAC) configured to deliver pulsed neutron beams. The LINAC electron pulse width can vary between 5 ns and 5 us, a repetition rate of 1-500 pulses per second and neutron yield of up to 1013 n/s. Over the years several experimental setups and techniques were developed to enable a variety of measurement capabilities. The experiments cover the energy range from 0.001 eV to 20 MeV and included neutron transmission, capture, scattering and fission measurements. The facility is also equipped with a Lead Slowing-Down Spectrometer (LSDS) producing a high neutron flux that is used for simultaneous measurements of the fission cross section and fission fragment mass and energy distributions. Detectors for (n, alpha) and (n, p) cross section measurements using the LSDS were also developed and measurements of (n, alpha) cross section were completed. The high neutron flux inside the LSDS enables measurements on small samples (sub micrograms) or samples with small cross section (sub millibarns). In order to fully utilize the capabilities of the facility, several measurement techniques were developed; high accuracy (<1%) total cross sections were measured using iron and uranium filtered neutron beams. A system for fast neutron scattering measurements using an array of liquid scintillators and a digital data acquisition system was recently developed and used for several measurements and is now being adapted for fission neutron studies. Methods for simultaneous measurements of fission and capture cross sections using the RPI multiplicity detector are under development and new modular detectors for both fast and resonance region neutron detection were developed and deployed. These developments result in numerous measurements on different materials and provide input to improved evaluated nuclear data libraries and thus help improve the accuracy of calculations of nuclear reactors and other nuclear systems.


This is a preview of a remote PDF: https://www.epj-conferences.org/articles/epjconf/pdf/2010/07/epjconf_efnudat2010_05001.pdf

Y. Danon, Z. Blain, R. Bahran, M. Rapp, J. Thompson, D. Williams, G. Leinweber, D. Barry, R. Block, J. Hoole. The nuclear data program at rensselaer, EPJ Web of Conferences, 2010, DOI: 10.1051/epjconf/20100805001