Value of shear wave arrival time contour display in shear wave elastography for breast masses diagnosis
ScIEnTIfIc RepoRts |
Value of shear wave arrival time contour display in shear wave elastography for breast masses diagnosis
OPEN To evaluate the diagnostic performance of shear wave arrival time contour (SWATC) display for the diagnosis of breast lesions and to identify factors associated with the quality of shear wave propagation (QSWP) in breast lesions. This study included 277 pathologically confirmed breast lesions. Conventional B-mode ultrasound characteristics and shear wave elastography parameters were computed. Using the SWATC display, the QSWP of each lesion was assigned to a two-point scale: score 1 (low quality) and score 2 (high quality). Binary logistic regression analysis was performed to identify factors associated with QSWP. The area under the receiver operating characteristic curve (AUROC) for QSWP to differentiate benign from malignant lesions was 0.913, with a sensitivity of 91.9%, a specificity of 90.7%, a positive predictive value (PPV) of 74.0%, and a negative predictive value (NPV) of 97.5%. Compared with using the standard deviation of shear wave speed (SWSSD) alone, SWSSD combined with QSWP increased the sensitivity from 75.8% to 93.5%, but decreased the specificity from 95.8% to 89.3% (P < 0.05). SWSSD was identified to be the strongest factor associated with the QSWP, followed by tumor malignancy and the depth of the lesion. In conclusion, SWATC display may be useful for characterization of breast lesions.
It has been noted that breast cancer is stiffer than normal breast tissue and the stiffening process begins in the
early stage of cancer. Therefore, ultrasound elastography is often used to help diagnose breast lesions. There
are two types of elastography technologies: strain elastography and shear wave elastography1. Strain
elastography provides a map of tissue deformation when the lesion is manually compressed by the ultrasound
transducer. Shear wave elastography assesses the speed (V, which is related to the Young modulus in kilopascals by
3V2) of shear wave propagation within the lesion2. Strain elastography typically can only provide qualitative or
semi-quantitative information and is more operator-dependent. Shear wave elastography provides quantitative
information of tissue stiffness, and is generally less operator dependent and more reproducible3, 4. Therefore, shear
wave elastography is used more often as a supplement to conventional ultrasound imaging in clinical practice.
Shear wave elastography has been shown to improve the diagnostic performance in differentiating benign
from malignant breast lesions5, 6. However, it has been noted that low quality of shear wave propagation (QSWP)
detected in the tissue may lead to invalid shear wave speed measurements7, 8. For example, shear wave
measurements in simple cysts are often invalid because shear waves cannot propagate in liquid. As another example,
shear wave elastography in invasive cancers typically have a higher failure rate because shear wave measurements
in very stiff lesions are often unreliable9. The QSWP may also be influenced by the transducer motion, patient
motion, lesion depth, tissue inhomogeneity, calcifications10 etc., which may lead to incorrect measurements in
Several ultrasound companies have provided tools to help users determine if a shear wave measurement is
reliable or not. In virtual touch quantification (VTQ; Siemens Medical Solutions, Mountain View, CA, USA),
a 2D quality map is provided where the green color represents high quality for shear wave speed measurement
while yellow or red color indicates low quality. For Supersonic Imagine (SSI, Aix-en-Provence, France), regions
with low QSWP are not color-coded. Toshiba scanners (Toshiba Medical System, Tochigi, Japan) provide a
?propagation mode? that displays the shear wave arrival time contours (SWATC) to help users evaluate the reliability
of shear wave measurements. The intervals between the displayed contour lines are wider in stiff tissues and
narrower in soft tissues. In areas where the contour lines are parallel, the shear waves propagate properly and the
reliability of the obtained data is high. On the contrary, in areas where the contour lines are distorted and not
parallel to one another, the reliability of the obtained data is low. These quality assurance tools are useful for users
to select regions of high shear wave measurement confidence to increase the reliability of measurements.
Barr et al.8 recently found that the addition of a quality measurement of shear wave speed estimation can
increase sensitivity (from 50% to 93%) for breast cancer detection without significant loss of specificity (from
94% to 89%). They believed that low quality measurement might be a feature of malignancy. However, the low
QSWP may also be observed in some benign breast lesions7. Thus, it is important to investigate factors associated
with the QSWP, which can help to identify and disentangle these confounding factors and improve the accuracy
of diagnosis. Our study thus aims to evaluate the diagnostic performance of SWATC display for the diagnosis of
breast lesions, and to identify factors associated with the QSWP in breast lesions.
Materials and Methods
Patients. This retrospective study was approved by The Ethical Committee of Shanghai Tenth People?s
Hospital. Due to the retrospective nature of the study, the requirement to obtain informed consent from the
patients was waived. This study was performed in accordance with the Declaration of Helsinki for human study.
From January 2016 to July 2016, seven hundred and seventeen consecutive patients with suspicious breast lesions
had conventional ultrasound examination and shear wave elastography. The inclusion criteria were: (a) no
history of treatment such as surgery, radiotherapy, or chemotherapy before ultrasound examination; (b) with
histopathologic findings; (c) breast lesions can be detected by ultrasound; (d) solid breast lesions or approximate solid
lesions (<25% cystic). A total of 288 breast lesions in 284 patients met the criteria. For patients with more than
one lesion, the lesion with the highest ultrasound Breast Imaging Reporting and Data System (BIRADS) category
was chosen. If there were multiple lesions with the same highest BI-RADS category, all of them were chosen.
Among these 284 patients, 11 patients had incomplete data and were excluded. Finally, a total of 277 breast masses
(215 benign, 62 malignant) in 273 patients (mean age 45.1 ? 14.6 years; range 15?85 years) were included in this
study. The mean lesion size on B-mode ultrasound measurement was 15.6? 8.5 mm (range, 4.1?63.2 mm).
Ultrasound Examination. Conventional ultrasound and shear wave elastography examinations were
performed using the same Aplio500 ultrasound scanner (Toshiba Medical Systems Corporation, Tochigi, Japan)
with a 14L5 liner array transducer (frequency range, 5?14 MHz), by one of two board-certified radiologists with
more than 2-years of experience in breast ultrasound and elastography. For conventional ultrasound, a standard
scanning protocol was used to obtain both transverse and longitudinal images of each target lesion11. Shape (oval/
round, irregular), orientation (parallel, not parallel to skin), margin (circumscribed, non-circumscribed), lesion
depth (measured as the distance from the skin to the center of the mass), echo pattern (isoechoic, complex cystic
and solid, hypoechoic etc.), posterior features (unchanged, changed), calcifications (present, absent), lesion size
(maximal diameter as measured on ultrasound) and vascularity (present, absent) on color Doppler images were
recorded. Afterwards, Lesions were classified according to the ultrasound BI-RADS lexicon of American College
of Radiology (ACR)12.
Shear Wave Elastography. Shear wave elastography measurements were obtained after conventional
ultrasound imaging by the same operator. When obtaining shear wave elastography, patients were asked to suspend
respiration for several seconds. The transducer was kept perpendicular to the body surface with minimal
compression because excessive compression can change the stiffness of tissue. The lesion of interest was placed in the
center of the ultrasound image. After the ultrasound image was optimized, the ?one shot scan? mode in which
image quality is given higher priority was selected to acquire the shear wave image (Figs?1 and 2). There are three
options to display data after imaging frozen: elasticity mode, propagation mode, and speed mode. The QSWP
was assessed using a two-point scale based on the shape of the contour lines displayed in the propagation mode.
Score1 (low quality) was assigned when the contour lines are distorted and unparalleled; score 2 (high quality)
was assigned to lesions with parallel lines (Fig.?3). Subsequently, elasticity and speed mode were successively
selected, the region of interest (ROI) was artificially set to cover the lesions. The size of ROI can be adjusted
according to the shape of the target lesion in both elasticity and speed mode. To ensure the reliability of SWE,
distorting factors such as calcification, obvious cystic parts or surrounding tissue of breast lesions were avoided
when placing the ROI box on the image. For lesions with low quality of shear wave propagation, two ROI boxes
were selected. One ROI was adjusted according to the lesion shape to encompass the maximum lesion area to
acquire the E-mean, ESD, SWS-mean and SWSSD of the lesion. The other was placed on the stiffest area to obtain
the maximum value of elastic and speed according to the color map on which stiff tissues were coded with red,
with areas of decreasing stiffness coded with orange, green, light blue, and dark blue (Fig.?2). And then the
scanner automatically calculated the mean elasticity (E-mean), elasticity standard deviation (ESD), mean shear wave
speed (SWS-mean) and standard deviation of shear wave speed (SWSSD).
Image Interpretation. Two radiologists with more than 2 years of experiences in shear wave elastography
reviewed the images to choose the image which quality is best and the propagation contour map to assign a
quality score for each lesion. In case of discrepancies, consensus was obtained by consulting with a third supervising
radiologist. All radiologists were blinded to patient data including clinical information and grayscale images.
Histologic Diagnosis. Patients had ultrasound-guided breast biopsy (at least three samples obtained) or
surgical removal of the lesion to obtain histopathological readings for comparison with ultrasound results.
Statistical Analysis. All statistical analyses were performed using the SPSS software (version 20.0; SPSS,
Chicago, III). Mean ? standard deviation was calculated for continuous data with normal distribution, and the
difference was compared using t test. ?2 test or Fisher?s exact probability test was used to compare
categorical variables. A statistically significant difference was defined as P< 0.05. Main statistical analysis was
composed of two parts. First, diagnosis performance of different shear wave elastography parameters (E-mean, ESD,
SWS-mean, SWSSD, and QSWP) was evaluated. The t test was used to investigate the difference between benign
and malignant lesions. With histopathologic diagnosis as the reference standard, the diagnostic performances for
all shear wave elastography parameters were evaluated by receiver operating characteristic (ROC) curve analysis.
Sensitivity, specificity, negative predictive value (NPV), positive predictive value (PPV), and area under ROC
curve (AUROC) were calculated. The cut-off value of each parameter was selected when the Youden index
(sensitivity + specifcity-1) reached the maximum value. The comparisons of sensitivity and specificity for different
parameters were performed using the McNemar test. Second, binary logistic regression was used to identify
?Benign phyllodes tumor
?Subacute inflammatory fibrous hyperplasia
?Invasive ductal carcinoma
?Invasive lobular carcinoma
NO. of lesions
factors associated with the QSWP. All ultrasound parameters showing a significant difference between high and
low QSWP were used in the binary logistic regression.
Basic characteristics. There were 215 (78%) benign and 62 (22%) malignant lesions (Table?1) in this study.
The mean age of patients with malignant breast lesions (59.7? 12.8 years; range: 31?85 years) was significantly
higher than the age of patients with benign breast lesions (40.9 ? 12.2 years; range: 15?81 years). The
maximum diameter of malignant breast lesions (20.5 ? 9.5 mm; range: 7.0?61.9 mm) was significantly higher than
that of benign lesions (14.2 ? 7.7 mm; range: 4.1?63.2 mm). For conventional ultrasound features, irregular shape,
non-parallel orientation, changed posterior features (post lesion enhancement, shadowing, or their
combination), non-circumscribed margin, and calcification were more commonly found in malignant breast lesions (all
P < 0.05) (Table?2).
Diagnostic performances of shear wave elastography. The values of E-mean, ESD, SWS-mean and
SWSSD in malignant breast lesions were significantly higher than those of benign lesions (Table?2). Using
quantitative parameters of shear wave elastography, breast lesions with values greater than or equal to the cut-off values
were considered as malignancy whereas the remaining breast lesions were classified as benign. Compared with
other quantitative shear wave parameters, SWSSD had the highest AUROC value of 0.896 (95% CI: 0.840, 0.953)
with the optimal cut-off value at 1.14 m/s. SWSSD had a sensitivity of 75.8%, specificity of 95.8%, accuracy of
91.3%, PPV of 83.9%, and NPV of 93.2% (Table?3).
Breast lesions with shear wave propagation quality score of 1 (low quality) were classified as malignant whereas
those with score of 2 (high quality) were classified as benign. Among the 277 lesions, 77 had a score of 1 (low
quality) and 200 had a score of 2 (high quality). There were 57 (74%) malignant and 20 (26%) benign lesions in the
low image quality group, and 5 (2.5%) malignant and 195 (97.5%) benign lesions in the high image quality group.
The AUROC value of shear wave propagation quality score based on arrival time contour display was 0.913
(95% CI: 0.868?0.958), with a sensitivity of 91.9%, a specificity of 90.7%, a PPV of 74.0% and an NPV of 97.5%.
Those with diameters greater than 15mm, shear wave propagation quality score had a sensitivity of 100%,
specificity of 82.7%, accuracy of 88.4%, PPV of 75%, and NPV of 100%. We also investigated if diagnosis performance
can be improved by combining shear wave propagation quality score and SWSSD. In this method, breast lesions
with SWSSD greater than or equal to the cut-off value were classified as malignant. In addition, lesions with shear
wave quality score of 1 were classified as malignant regardless of SWSSD. All remaining lesions were classified as
benign. Compared with SWSSD alone, the sensitivity increased from 75.8% to 93.5% (P < 0.001) while specificity
decreased from 95.8% to 89.3% (P < 0.05) by combining shear wave propagation quality score and SWSSD.
Factors associated with the quality of shear wave propagation. We investigated the following
possible factors: patient age, tumor malignancy, lesion diameter, lesion depth, shape, orientation, margin, SWSSD,
ESD, E-mean, SWS-mean and posterior feature. In univariate analysis, larger lesion size, higher value of SWSSD,
ESD, E-mean, SWS-mean, deeper lesion depth, and malignancy were significantly associated with lower QSWP.
Regular shape, parallel orientation, unchanged posterior features, and circumscribed margin were more
commonly found in images with higher QSWP (all P < 0.05). Binary logistic regression analysis showed that SWSSD
was the most important factor associated with the QSWP, with an odds ratio (OR) of 86.05 (95% CI: 2.947?2513;
P < 0.05), followed by tumor malignancy (OR: 22.53; 95% CI: 4.028?126.1) and the depth of lesion (OR: 6.19;
95% CI: 1.811?21.22).
Mean age (year)
Cut-off value Sensitivity (%) Specificity (%) Accuracy (%) PPV (%)
SWATC display+ SWSSD
Shear wave elastography provides quantitative value of lesion stiffness in unit of kilopascals or meters per second,
which has shown promise in improving the diagnosis performance of breast lesion imaging13, 14. Studies have
shown that selection of high-quality shear wave images is important because image quality substantially
influences the performance for tumor diagnosis15. The SWATC display provides direct visual feedback for the user to
assess the reliability of shear wave elastography. Unreliable shear wave measurements may result from technical
reasons such as patient motion and transducer motion. For breast imaging, shear wave images with minimal
probe and patient motion usually can be obtained by experienced sonographers or radiologists. After excluding
these technical factors, if a solid lesion is not color coded or has low quality of shear wave propagation, it has a
high probability of being malignant. In our study, SWATC display was used to determine if a lesion was benign
or malignant. Compared with E-mean, ESD, SWS-mean, and SWSSD, the sensitivity of SWATC display score was
significantly higher, while specificity was similar. The AUROC value of the SWATC display score was highest
among these elastography parameters. It seems that the application of SWATC display score in the diagnosis of
breast lesions is promising. Compared with SWSSD alone, the sensitivity of combined SWSSD and SWATC display
score increased from 75.8% to 93.5% while specificity decreased from 95.8% to 89.3%, which is consistent with
previous studies8. In our study, SWATC display score had a NPV of 100% for the lesions which are greater than
15mm. When the breast mass is greater than 15 mm in diameter with shear wave quality score of 2, we may not do
puncture but follow up in clinical practice. With the help of SWATC display, it may also be possible to intelligently
select regions of reliable shear wave measurements for lesion characterization to improve diagnostic accuracy.
Previous studies have reported that invalid shear wave speed measurements or low QSWP were more
frequently found in malignant breast lesions8, 16. To use shear wave measurement quality as diagnostic information,
it is important to study confounding factors associated with shear wave measurement quality. In this study, we
investigated various patient and lesion factors that can influence the QSWP. We found that lesion size, value
of ESD, SWSSD, and E-mean, lesion depth, malignancy, shape, orientation, posterior features, margin, and
calcification were significantly correlated with QSWP. Results of binary logistic regression analysis showed that
SWSSD was the most important factor associated with the QSWP, followed by malignancy and the depth of lesion.
According to the depth of the lesion, we divided it into two subgroups (Group 1, ?15 mm; Group 2, >15 mm) in
the present study. In 187 breast lesions with the depth less than or equal to 15 mm, 85.6% (160/187) breast lesions
had high QSWP, 14.4% (27/187) breast lesions had low QSWP. However, in 90 breast lesions with the depth more
than 15 mm, 44.4% (40/90) breast lesions had high QSWP, 55.6% (50/90) breast lesions had low QSWP. In a study
by Chang et al.17, they found that lesion depth significantly correlates with image quality for strain elastography.
For shear wave measurements based on acoustic radiation force, the penetration of linear transducers is typically
less than 4.5 cm. And the depth of lesion would affect the QSWP for breast lesions18?20. This is probably due to
tissue attenuation of ultrasound: as the depth increases, the push pulse is attenuated more, which leads to lower
shear wave amplitude. In addition, ultrasound detection pulses attenuate more with increased depth, leading
to less reliable detection. As a result, the reliability of shear wave measurements generally decreases with depth.
Therefore, the effects of lesion depth should be properly accounted for in order to improve the accuracy of lesion
diagnosis using shear wave propagation quality.
Tumor malignancy was identified as another factor associated with low quality of shear wave propagation
(OR:22.53). In our study, low QSWP was more commonly found in malignant breast lesions. Tissue
inhomogeneity might be one reason for low QSWP in malignancy. Malignant breast lesions are histologically
heterogeneous due to lymphocytic infiltrates and necrosis21, whereas benign breast lesions generally have a more uniform
pathological structure. Tissue inhomogeneity can distort shear wave propagation contour lines and lead to a low
QSWP score. The heterogeneity of breast lesions can also be assessed by SWSSD22: higher value of SWSSD indicates
higher degree of heterogeneity. In this study, SWSSD was found to be associated with QSWP.
There were some limitations in the study. First, the intra-operator and inter-operator consistency of
quantitative shear wave speed measurements and QSWP were not assessed in our study. Previous studies showed that
shear wave measurements were highly reproducible for assessing breast lesions and thus observer variability is
not expected to have large influence on this study23, 24. Second, only patients and lesions factors were evaluated
for association with shear wave propagation quality, while equipment related factors (such as thermal noise,
finite signal bandwidth, and the geometric spreading and absorbing of shear waves) were no studied25. Third, the
retrospective nature of the study could not avoid selection bias and future prospective study is needed. Finally,
this study was single-center study, further prospective study with multicenter collaborations is needed to verify
In conclusion, SWATC display showed promising diagnostic performance and may be used as a reference to
place the region of interest (ROI) for shear wave speed measurement and characterization of breast lesions. SWSSD
was the most important factors associated with QSWP, followed by tumor malignancy and the depth of lesion.
Competing Interests: The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and
Open Access This article is licensed under a Creative Commons Attribution 4.0 International
License, which permits use, sharing, adaptation, distribution and reproduction in any medium or
format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the
Creative Commons license, and indicate if changes were made. The images or other third party material in this
article are included in the article?s Creative Commons license, unless indicated otherwise in a credit line to the
material. If material is not included in the article?s Creative Commons license and your intended use is not
permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the
copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
Supported in part by Grant SHDC12014229 from Shanghai Hospital Development Center , Grants 14441900900 and 15411969000 from Science and Technology Commission of Shanghai Municipality.