Molecular cloning and expression of a novel trehalose synthase gene from Enterobacter hormaechei

Microbial Cell Factories, Jun 2009

Background Trehalose synthase (TreS) which converts maltose to trehalose is considered to be a potential biocatalyst for trehalose production. This enzymatic process has the advantage of simple reaction and employs an inexpensive substrate. Therefore, new TreS producing bacteria with suitable enzyme properties are expected to be isolated from extreme environment. Results Six TreS producing strains were isolated from a specimen obtained from soil of the Tibetan Plateau using degenerate PCR. A novel treS gene from Enterobacter hormaechei was amplified using thermal asymmetric interlaced PCR. The gene contained a 1626 bp open reading frame encoding 541 amino acids. The gene was expressed in Escherichia coli, and the recombinant TreS was purified and characterized. The purified TreS had a molecular mass of 65 kDa and an activity of 18.5 U/mg. The optimum temperature and pH for the converting reaction were 37°C and 6, respectively. Hg2+, Zn2+, Cu2+and SDS inhibited the enzyme activity at different levels whereas Mn2+ showed an enhancing effect by 10%. Conclusion In this study, several TreS producing strains were screened from a source of soil bacteria. The characterization of the recombinant TreS of Enterobacter hormaechei suggested its potential application. Consequently, a strategy for isolation of TreS producing strains and cloning of novel treS genes from natural sources was demonstrated.

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

http://www.microbialcellfactories.com/content/pdf/1475-2859-8-34.pdf

Molecular cloning and expression of a novel trehalose synthase gene from Enterobacter hormaechei

Ming Yue 1 Xiu Li Wu 1 Wei Na Gong 0 Hong Biao Ding 1 0 Institute of Plant Protection, Chinese Academy of Agricultural Sciences , Beijing 100094 , PR China 1 Feed Research Institute, Chinese Academy of Agricultural Sciences , Beijing 100081 , PR China Background: Trehalose synthase (TreS) which converts maltose to trehalose is considered to be a potential biocatalyst for trehalose production. This enzymatic process has the advantage of simple reaction and employs an inexpensive substrate. Therefore, new TreS producing bacteria with suitable enzyme properties are expected to be isolated from extreme environment. Results: Six TreS producing strains were isolated from a specimen obtained from soil of the Tibetan Plateau using degenerate PCR. A novel treS gene from Enterobacter hormaechei was amplified using thermal asymmetric interlaced PCR. The gene contained a 1626 bp open reading frame encoding 541 amino acids. The gene was expressed in Escherichia coli, and the recombinant TreS was purified and characterized. The purified TreS had a molecular mass of 65 kDa and an activity of 18.5 U/mg. The optimum temperature and pH for the converting reaction were 37C and 6, respectively. Hg2+, Zn2+, Cu2+and SDS inhibited the enzyme activity at different levels whereas Mn2+ showed an enhancing effect by 10%. Conclusion: In this study, several TreS producing strains were screened from a source of soil bacteria. The characterization of the recombinant TreS of Enterobacter hormaechei suggested its potential application. Consequently, a strategy for isolation of TreS producing strains and cloning of novel treS genes from natural sources was demonstrated. - Background Trehalose, a non-reducing disaccharide with two glucoses linked by a 1, 1-glycosidic linkage, is widespread throughout the biology world. In some lower orders of plants and fungi, this disaccharide is mainly stored as a source for carbon and energy [1]. In the animal kingdom it is abundant and e.g. insects use it as a source for glucose to provide sufficient energy during flight [2]. In yeast and bacteria, it was reported that trehalose could protect cells from a variety of physical and chemical stresses, such as freezing, heat, desiccation, acidic conditions, and osmotic and oxidative stress [3,4]. Due to its desirable characteristics, it has been also applied as an additive, stabilizer and preservative to food, cosmetics, as well as medicinal and biological reagents [5]. At present, many trehalose synthesizing enzymes systems have been reported in microorganisms [6]. There are three pathways widely distributed among them: (1) Phosphatebased enzyme complex systems: Trehalose is synthesized through the transfer of the glucosyl moiety from UDP-glucose to glucose-1-phosphate, forming the intermediate trehalose-6-phosphate which was then hydrolyzed by phosphatase to yield free trehalose [7,8]. (2) A two-step enzyme system with maltooligosyl trehalose synthase (TreY) and maltooligosyl trehalose trehalohydrolase (TreZ) were found for trehalose biosynthesis in Arthrobacter sp. [9], Brevibacterium helvolum [10] and Bradyrhizobium [11]. (3) TreS synthesizing trehalose from maltose in one step was found only in bacteria [12]. We are most interested in TreS as a simple biocatalyst for trehalose production. Up to now, a few treS genes from different bacterial species have been reported to be cloned, expressed and characterized, including Pseudomonas stutzeri CJ38 [13], Pimelobacter sp. R48 [14], Mycobacterium smegmatis [15], Arthrobacter aurescens [16], Propionibacterium freudenreichii [17], Corynebacterium glutamicum ATCC13032 [18] and some thermophilic strains [19-21]. The Tibetan plateau is a high-altitude region where it can be assumed that bacteria are frequently exposed to stress conditions, such as cold, hypoxia, nutritional stress and high ultraviolet radiation. The microorganisms in this environment have received much interest because of their special properties [22]. Therefore, it is highly desirable to develop an effective strategy for isolation and subsequent screening of new TreS from the extreme environment In this study, several TreS producing strains were screened from soil bacteria derived from the plateau soil sample by degenerate PCR based on the analysis of conserved domains. The full-length of the novel treS gene of Enterobacter hormaechei was obtained by thermal asymmetric interlaced PCR (TAIL-PCR). Subsequently, the gene was expressed in Escherichia coli (E. coli), and the recombinant TreS was purified and characterized. Results and discussion Gene sequence analysis and strain screenings By multiple alignment analysis, the four highly conserved motifs HE/QPDLN, NHDELD/TLE, GIRRRLAP and YGDEIGMGD were found among protein sequences of TreS published at NCBI (Figure 1). The NHDELD/TLE domain (the DF2 primer region) had the feature of glycoside hydrolase (GH) family 16 site, suggesting that the identified treS gene encoding products possibly had hydrolytic activity. In addition, there were some other motifs identified by sequence alignment with relatively lower homologies, including N/QHTSDQ/AH, GFRL/ ADA, VRTPMQW and GGFS (Figure 1). Among the 86 bacterial strains isolated from the plateau soil sample, 6 different bacterial species were identified to be treS positive. Amplified core regions were sequenced and showed different similarity to relevant genes as summarized in Table 1. This result provided evidence for the distribution of TreS producing bacteria in extreme environment. FMiuglutirpele1sequence alignment of TreS Multiple sequence alignment of TreS. P.sp.TreS, Pimelobacter sp. R48 TreS (BAA11303); T.fus.TreS, Thermobifida fusca TreS (AAZ54622); M.sme.TreS, Mycobacterium smegmatis TreS (ABK71531); C.glu.TreS, Corynebacterium glutamicum TreS (CAF20645); A.aur.TreS, Arthrobacter aurescens TreS (ACL80570); P.tor.TreS, Picrophius torridus TreS (AAT42654); E.hor.TreS, Enterobacter hormaechei TreS (FJ215664). Conserved residues are in frames. GH16 represents conserved domain of glycoside hydrolase family 16. Arrows indicate putative conserved active sites. Asterisks located under the alignment represent identity; colons represent strong characteristic similarity and periods represent similarity. Cloning of Enterobacter hormaechei treS gene and analysis A 228 bp core region of Enterobacter hormaechei treS gene was amplified by degenerate PCR. Its 3' and 5' flanking sequences were amplified by TAIL-PCR. By this a 1626 bp open reading frame (ORF) sequence was obtained, encod Blast result of core regions DF2 & DR2 228/76 DF2 & DR2 228/76 DF2 & DR2 225/75 DF1 & DR1 444/148 DF1 & DR2 642/214 DF1 & DR2 657/219 ing 541 amino acids with a predicted molecular mass (Mr) of 61.8 kDa. As analyzed by NCBI BLAST, the full-length ORF of the Enterobacter hormaechei treS gene showed the highest similarity with several encoding sequences of TreS from Klebsiella pneumoniae 342 (CP000964, 815/1161, 70%), Pseudomonas stutzeri A1501 (NC000304, 386/569, 67%) and Pseudomonas aeruginosa PA7 (CP000744, 730/ 1119, 65%). All of the conserved regions mentioned above were found in Enterobacter hormaechei TreS (Figure 1). Besides the GH16 domain, other active sites of glycosidase (H...D...E...HD) were also observed in most bacterial TreS (Figure 1), as reported by Chen [20]. It is also reported that a glycosidase of Thermobifida fusca had TreS activity [21]. Therefore, it was suggested that TreS might employ a hydrolysis mechanism. Expression and purification of recombinant TreS The pET30a(+)-treS plasmid was transformed into the E. coli BL21 (DE3) plysS expression host, and cells were induced by isopropyl -D-1-thiogalactopyranoside (IPTG). When compared to the sample without induction, only the induced cells containing the recombinant vector expressed an extra 65 kDa protein (Figure 2). The recombinant protein was about 3 kDa heavier than the predicted Mr of 61.8 kDa, which was due to the additional 46 amino acids including the 6-His tag at the N' terminus. 67 mg of recombinant TreS were purified from the supernatant of cell lysate containing 589 mg of crude protein. Soluble recombinant protein was effectively purified at a yield of 11.4% (w/w) of the total soluble protein. The final preparation showed a single band with an Mr of approximately 65 kDa (Figure 2). Activity assay of recombinant TreS and products assay of catalytic reaction TreS activity was detected with purified TreS in reactions of the conversion between maltose and trehalose. It was confirmed that the cloned fragment was the intrinsically Genbank accession No. Klebsiella pneumoniae Klebsiella pneumoniae Corynebacterium glutamicum Pseudomonas putida Stenotrophomonas maltophilia Pseudomonas fluorescens coding sequence of active TreS. The highest activity was calculated to be 18.5 U/mg. The activity value was lower than that of the recombinant TreS of Pseudomonas stutzeri CJ38 [13], but close to that of the recombinant TreS of Mycobacterium smegmatis [15]. The amount of glucose was also detected by ion chromatography (IC) (Figure 3) and shown to be consistent with the features of glycoside hydrolase as discussed above. Commonly, glucose is released in most of the conversion reactions of bacterial-derived TreS [14-21]. The small amount of glucose is generated under entry of a water molecule into the catalytic pocket to induce hydrolysis prior to formation of the glycosidic linkage [19]. Individually, TreS from Pseudomonas stutzeri CJ38 was the only one reported without generation of glucose as a byproduct [13]. We found relatively low homology between the two TreS from Enterobacter hormaechei and Pseudomonas stutzeri CJ38 (data not shown), indicating that there exists a structural difference in the functional role. Hence, in order to improve the efficiency of the major trehalose formation, the strategy to screen the enzyme without byproducts still remains to be further exploited. The effect of pH and temperature on recombinant TreS activity The conversion rate of recombinant TreS was constantly above 30% (equivalent to 65% of the maximal activity) at a broad pH range of 4 to 9, and reached the highest activity at pH 6 (Figure 4A). The maximal conversion rate of 48% was observed at the optimum temperature of 37C (Figure 4B). The optimum temperature was similar to that of Pseudomonas stutzeri CJ38 [13], Mycobacterium smegmatis [15], Arthrobacter aurescens [16] and Thermus caldophilus [23]. Although the conversion from maltose to trehalose could be accelerated at high temperatures (data not shown), TreS could produce more byproduct glucose when the temperature was increased [21,23]. Thus, it is probably more efficient to carry out conversions at moderate temperatures. In this report, the recombinant TreS showed a stable performance under the wide working SFDigSu-PreAG2E analysis of samples during TreS purification SDS-PAGE analysis of samples during TreS purification. All the protein samples were loaded onto a 12.5% polyacrylamide gel under denaturing conditions. The gel was stained with Coomassie Brilliant Blue R-250. The arrow indicates recombinant TreS. Lane 1, control: Cell lysate of E. coli BL21 (DE3) plysS with pET30a(+); lane 2, cell lysate before induction; lane 3, cell lysate after induction; lane 4, flow through of the Ni-NTA column; lane 5, wash by 20 mM imidazole; lane 6, wash by 40 mM imidazole; lane 7, wash by 60 mM imidazole; lane 8, purified TreS; lane M, molecular weight marker (Bomaide, Beijing, China). conditions (pH 49 and 2055C, Figure 4). It suggested that the enzyme might be a candidate for trehalose production. The effects of metal ions and reagents on recombinant TreS activity Recombinant TreS activity could be influenced by several ions and reagents at different levels. The enzyme was strongly inhibited by Hg2+, Zn2+ and Cu2+ for more than 40% and by SDS for about 90%. Other ions and chemical reagent, such as Mg2+, Fe2+, Na+, NH4 + and EDTA, had no obvious effect, whereas Ca2+ and Mn2+ increased the activity slightly (Table 2). Besides, TreS was inactivated by addition of -mercaptoethanol (-ME), which supports the hypothesis of a structural dependence on disulfidebonds. Kinetics of recombinant TreS activity The Km values for recombinant E. hormaechei TreS were found to be 25 mM for maltose and 75 mM for trehalose. Vmax values of 1.4 mM/min/mg protein for maltose and 3.2 mM/min/mg protein for trehalose were calculated, respectively. With regard to these results, the recombinant TreS had a higher affinity to maltose and a favorite reaction direction toward the synthesis of trehalose. Interestingly, all reported TreS enzymes share the feature of a reversible conversion at different degrees. Conclusion In summary, some TreS producing strains had been isolated from natural environment based on conserved domains and degenerate PCR. The treS gene from Enterobacter hormaechei was cloned by TAIL-PCR and expressed successfully. The characterization of the recombinant TreS suggested its potential application for trehalose production from maltose. Thus, the general applicability of this strategy for isolation of TreS producing strains and cloning of novel treS genes from natural sources was demonstrated. Methods Bacterial strains, media and culture conditions Bacterial strains obtained from a Tibetan Plateau soil specimen were grown and enriched in nutrient broth medium (pepton1% w/v, beef extract 0.3% w/v, NaCl 0.5% w/v) at 30C for 2 days. Arthrobacter aurescens, serving as a TreS positive control, was obtained from China General Microbiological Culture Collection Center (CGMCC1.1892). E. coli Top10 was used for construction of recombinant plasmids. E. coli BL21 (DE3) plysS (Novagen, Germany) was used as expression host and grown in LB medium containing 50 g/ml kanamycin (Kan) and 34 g/ml chloramphenicol (Cam) after transformation. Gene sequence analysis and strain screenings All bacterial TreS sequences published in the NCBI Database were collected and analyzed by the multiple sequence alignment program CLUSTAL W2 http:// www.ebi.ac.uk/Tools/clustalw2. As shown in Figure 1, four degenerate primers (DF1, 2 and DR1, 2) were synthesized based on the conserved domains (see additional file 1 for the primer sequences). DNA preparation of bacterial strains isolated from the soil specimen was performed by alkaline lysis [24]. Degenerate PCR was carried out according to the parameters optimized with the genome DNA template of Arthrobacter aurescens. PCR products were separated on a 1% agarose gel, recovered by using a Gel Extraction Kit (Tiangen, Beijing, China), and sub-cloned into the pMD18-T vector (TaKaRa, DaLian, China) for sequence analysis (SunBio, Beijing, China). The sequenced fragments were analyzed by BLAST http://www.ncbi.nlm.nih.gov/BLAST. All isolated positive strains were subsequently identified by their 16SrRNA sequence. Cloning of the treS gene of Enterobacter hormaechei and construction of the expression vector TAIL-PCR was performed to amplify the 3' and 5' fragments of Enterobacter hormaechei treS. The PU and PD primers (see additional file 1) for TAIL-PCR were designed IFCigausrsaey3of reaction products IC assay of reaction products. Reaction mixtures containing 400 l purified TreS solution and 100 l maltose (500 mM) substrate in 50 mM potassium phosphate buffer (pH 6) were incubated at 37C for 2 h. The reaction mixtures were subsequently analyzed by IC, as described in the "Methods" section. Peak 1, trehalose; peak 2, glucose; peak 3, buffer reagent; peak 4, maltose. and synthesized according to the core region amplified in degenerate PCR. The reaction parameters and the AD primers for TAIL-PCR were referred to previous reports [25,26]. The full length of treS was assembled from 3', 5' fragments and the core region. The deduced amino acid sequence was analyzed by DNAMAN 1.0. The TreSF and TreSR primers (see additional file 1) were synthesized to introduce Nco I and Not I sites into the 3' and 5' ends of treS ORF, respectively. The PCR product was digested by Nco I and Not I, and inserted into the same digested pET30a(+) vector (Novagen, Cat No. 69909-3, Darmstadt, Germany) to generate His-tagged pET30a(+)treS. The recombinant plasmid was confirmed by DNA sequencing and transformed to the E. coli BL21 (DE3) plysS. Protein expression and purification The E. coli BL21 (DE3) plysS transformed with pET30a(+)treS was cultured in LB medium containing 50 g/ml Kan and 34 g/ml Cam in a shaker at 220 rpm and 37C until an OD600 of 0.6 was reached. These cells were induced with a final concentration of 0.5 mM IPTG and grown at 25C for an addition of 4 h. Cell extracts were analyzed by 12.5% (w/w) SDS-polyacrylamide gel electrophoresis (SDS-PAGE). Gels with expressed protein were analyzed by a Molecular Imager Gel DocTM XR system 1708170 (Bio-Rad, Hercules CA, USA) using the Quantity one4.6.3 1-D analysis software. EFfifgeuctreof4pH and temperature on TreS activity Effect of pH and temperature on TreS activity. (A) Effect of pH on TreS activity. The enzyme activity of TreS at various pHs was assayed at 37C in 50 mM potassium phosphate buffer (pH 210.5) for 30 min, using 100 mM maltose as a substrate; (B) Effect of temperature on TreS activity. The enzyme activity of TreS at various temperatures was assayed in 50 mM potassium phosphate buffer (pH 7) for 30 min, using 100 mM maltose as a substrate. For purification, cells were harvested by centrifugation and resuspended in lysis buffer (50 mM KH2PO4K2HPO4, 500 mM NaCl, pH 7.9) followed by sonification and centrifugation at 12,000 g for 20 min at 4C to remove insoluble cell debris. The 6-His tagged protein in supernatant fraction was purified by using a Ni-NTA affin* The enzyme activity of TreS without the addition of ions or reagents was taken to be 100%. ity chromatography column (NEB, Beijing, China). Protein concentrations were determined by the Bradford method using bovine serum albumin as a standard [27]. Activity assay of recombinant TreS The catalytic reaction was performed in a mixture containing the TreS solution and 100 mM maltose in 50 mM phosphate buffer (pH 6) at 37C for 2 h. Samples were taken at different time intervals during the reaction and boiled for 10 min to stop the reaction. The reaction mixtures were separated by thin layer chromatography on G60 TLC silica plates (Merck, Darmstadt, Germany) using a solvent system of 1-butanol/pyridine/water (4:5:1, v/v). Products released by TreS were quantified by IC using a Dionex2500 system equipped with a CarboPacPA 20 column. One unit (U) of TreS was defined as the amount under the specified conditions [23]. The conversion rate was calculated by the ratio of the trehalose product to the amount of maltose substrate. Properties of recombinant TreS The optimum pH of TreS was assayed by incubating the purified enzyme with 100 mM maltose substrate in 50 mM potassium phosphate buffer at pH 2 to 10.5 and 37C for 30 min, respectively. The optimum temperature for TreS activity was determined at 10 to 60C using the same buffer at pH 7 for 30 min, respectively. To determine the effect of metal ions and different chemical reagents on TreS, its activity was also assayed in the presence of these ions or compounds at 1 mM, respectively. Determination of kinetic parameters The Michaelis-Menten (Km) and maximum activity (Vmax) constant for recombinant TreS were determined with different concentrations of substrates ranging from 1 to 200 mM, and the were plotted according to the Lineweaver and Burk method. Nucleotide sequence accession number The nucleotide sequence of Enterobacter hormaechei treS has been submitted to GenBank under accession no. Competing interests The authors declare that they have no competing interests. Authors' contributions MY carried out gene cloning, expression, and characterization of the enzyme, and composed the manuscript. XLW carried out the isolation of strains from soil sample and the degenerate PCR optimization together with MY. WNG performed the TAIL-PCR with genomic DNA of isolated strains. HBD conceived and supervised the study. All authors have read and approved the final manuscript. Additional material Additional file 1 Primers used in this study. The nucleotide sequences of the primers used We are grateful to Dr. Volker Jger for his insightful comments and language improvement on the manuscript. This research was supported by a key project of the Chinese international science and technology cooperation program (Grant No.2005DFA31070) and the National 863 Program.


This is a preview of a remote PDF: http://www.microbialcellfactories.com/content/pdf/1475-2859-8-34.pdf

Ming Yue, Xiu Wu, Wei Gong, Hong Ding. Molecular cloning and expression of a novel trehalose synthase gene from Enterobacter hormaechei, Microbial Cell Factories, 2009, 34, DOI: 10.1186/1475-2859-8-34