Evaluating the discriminatory power of EQ-5D, HUI2 and HUI3 in a US general population survey using Shannon’s indices

Quality of Life Research, Jun 2007

Objectives To compare quantitatively the discriminatory power of the EQ-5D, HUI2 and HUI3 in terms of absolute and relative informativity, using Shannon’s indices. Methods EQ-5D and HUI2/3 data completed by a sample of the general adult US population (N = 3,691) were used. Five dimensions allowed head-to-head comparison of informativity: Mobility/Ambulation; Anxiety/Depression/Emotion; Pain/Discomfort (EQ-5D; HUI2; HUI3); Self-Care (EQ-5D; HUI2); and Cognition (HUI2; HUI3). Shannon’s index and Shannon’s Evenness index were used to assess absolute and relative informativity, both by dimension and by instrument as a whole. Results Absolute informativity was highest for HUI3, with the largest differences in Pain/Discomfort and Cognition. Relative informativity was highest for EQ-5D, with the largest differences in Mobility/Ambulation and Anxiety/Depression/Emotion. Absolute informativity by instrument was consistently highest for HUI3 and lowest for EQ-5D, and relative informativity was highest for EQ-5D and lowest for HUI3. Discussion Performance in terms of absolute and relative informativity of the common dimensions of the three instruments varies over dimensions. Several dimensions are suboptimal: Pain/Discomfort (EQ-5D) seems too crude with only 3 levels, and the level descriptions of Ambulation (HUI3) and Self-Care (HUI2) could be improved. In absence of a formal measure, Shannon’s indices provide useful measures for assessing discriminatory power of utility instruments.

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

http://link.springer.com/content/pdf/10.1007%2Fs11136-006-9160-6.pdf

Evaluating the discriminatory power of EQ-5D, HUI2 and HUI3 in a US general population survey using Shannon’s indices

Mathieu F. (Bas) Janssen 0 Erwin Birnie 0 Gouke J. Bonsel 0 0 M. F. (Bas) Janssen (&) E. Birnie G. J. Bonsel Public Health Epidemiology, Department of Social Medicine, Academic Medical Center , 22660, 1100 DD Amsterdam, The Netherlands Objectives To compare quantitatively the discriminatory power of the EQ-5D, HUI2 and HUI3 in terms of absolute and relative informativity, using Shannon's indices. Methods EQ-5D and HUI2/3 data completed by a sample of the general adult US population (N = 3,691) were used. Five dimensions allowed head-to-head comparison of informativity: Mobility/Ambulation; Anxiety/ Depression/Emotion; Pain/Discomfort (EQ-5D; HUI2; HUI3); Self-Care (EQ-5D; HUI2); and Cognition (HUI2; HUI3). Shannon's index and Shannon's Evenness index were used to assess absolute and relative informativity, both by dimension and by instrument as a whole. Results Absolute informativity was highest for HUI3, with the largest differences in Pain/Discomfort and Cognition. Relative informativity was highest for EQ5D, with the largest differences in Mobility/Ambulation and Anxiety/Depression/Emotion. Absolute informativity by instrument was consistently highest for HUI3 and lowest for EQ-5D, and relative informativity was highest for EQ-5D and lowest for HUI3. Discussion Performance in terms of absolute and relative informativity of the common dimensions of the three instruments varies over dimensions. Several dimensions are suboptimal: Pain/Discomfort (EQ-5D) seems too crude with only 3 levels, and the level descriptions of Ambulation (HUI3) and Self-Care (HUI2) could be improved. In absence of a formal measure, Shannon's indices provide useful measures for assessing discriminatory power of utility instruments. - The need for assessing health-related quality of life (HRQL) has brought forth hundreds of HRQL instruments, both generic and disease-specific [1, 2]. Generic instruments fall into two main categories: (1) preference-based health classification systems, and (2) non-preference based measures, sometimes referred to as health profile or psychometric measures [1, 3, 4]. Preference-based classification systems, also referred to as multi-attribute utility instruments (MAUIs) are standardized health state classifications that can be used to obtain a single summary index (utility score) or so-called preference weight for different health states. At the core of any MAUI is a classification system consisting of multiple attributes (dimensions) with ordered levels for each dimension. Most MAUIs are generic and aim to cover the full spectrum of disease and disability. MAUIs are widely used as measures of health outcome and are applied in clinical and economic evaluation (to calculate QALYs) and in population health surveys. Three widely used MAUIs are the EQ-5D, the Health Utilities Index Mark 2 (HUI2) and the Health Utilities Index Mark 3 (HUI3) [57]. All three instruments have shown acceptable psychometric properties as established by conventional measures [8, 9]. Feasibility, reliability, validity and responsiveness are important measurement properties in MAUIs, just as they are in non-preference based HRQL and health status measures such as the SF-36. However, these properties may be operationalized differently in MAUIs compared to non-preference based measures [4, 10, 11]. An underlying property to the concepts of reliability, validity and responsiveness is the ability of an instrument to discriminate between (true) different levels of health. This requires a MAUI to define the full range of potential health states, and to be sensitive over this range. A necessary measurement property for any health status measure (including MAUIs) is the ability to discriminate among people at a single point in time. This property is sometimes referred to as sensitivity or, more accurately: discriminatory power [1214]. Guyatt et al. (1992) proposed a reliability coefficient as a suitable statistic to express discriminatory power [15]. Reliability essentially reflects two different concepts: (1) consistency, e.g. between raters (inter-rater reliability) or over time (test-retest reliability), and (2) discriminatory power: the ability of an instrument to discriminate among people [16]. We propose Shannons indices of informativity as suitable measures that solely reflect discriminatory power [17]. Discriminatory power of MAUIs is usually investigated in an informal and partial manner by examining the frequency distributions, e.g. for floor or ceiling effects [12, 13, 1820]. Shannons indices are suitable to assess discriminatory power in MAUIs for two reasons: first, they are theoretically based and second, they incorporate the frequency distribution across all categories of a MAUIs health status classification system (not just the highest and lowest categories, as is the case with ceiling and floor effects). Our aim is to investigate the discriminatory power of the EQ-5D, HUI2 and HUI3 in a general population sample, as expressed by Shannons indices. Informativity was assessed separately by dimension and by MAUI as a whole. A publicly available dataset was used (at http:// www.ahrq.gov/rice/), resulting from the US EQ-5D valuation study [21, 22]. Collected data consisted of self-completed EQ-5D and HUI2/3 data from a sample of the general adult US population, with an oversampling of Hispanics and non-Hispanic Blacks. The HUI2/3 data were collected using a standardized 15-item questionnaire, from which HUI2 and HUI3 health profiles were extracted using available recoding algorithms [23]. Only the responses of 3,691 respondents who had no missing data on any of the three instruments were included in this study (91.2% of the total number of respondents). The EQ-5D descriptive system consists of 5 dimensions (items) with 3 levels each, logically defining 243 unique health states (permutations). The HUI2 was originally developed to assess outcomes in survivors of cancer in childhood and contains 6 dimensions (excluding the original HUI2 dimension of fertility) with 45 levels per dimension. The HUI3, originally developed for a general population health survey in Canada, has 8 dimensions with 56 levels per dimension. The HUI2 and HUI3 descriptive systems define 8,000 and 972,000 unique health states, respectively [6]. Table 1 compares the 5 dimensions common to at least two of the classification systems: Mobility/Ambulation; Anxiety/ Depression/Emotion; Pain/Discomfort (EQ-5D; HUI2; HUI3); Self-Care (EQ-5D; HUI2); and Cognition (HUI2; HUI3). Shannons indices: background and properties The Shannon index, named after Claude Shannon who is considered to be the founder of information theory, was initially developed to separate noise from information carrying signals in telecommunication systems [17]. The Shannon index is also known as the ShannonWeaver index because of Warren Weavers contribution to Shannons original paper, and as the ShannonWiener index named after Norbert Wiener who independently developed a concept similar to Shannons [24, 25]. The Shannon index has been applied in a variety of fields, ranging from ecology (as a measure of biodiversity) to psychology, record linkage and molecular biology (genetic diversity) [2630]. In information theory, the information of a signal is distinguished from the meaning or the semantic content of a signal. Rather, the information is quantified and is identified with uncertainty. Informativity is dependent on the number of classes (e.g. bits or response options) and the distribution of the observations (the signal) among classes. For classifications, this implies that if one Table 1 Level descriptions for common dimensions between EQ-5D, HUI2 and HUI3 Mobility Mobility Ambulation No problems in Able to walk, bend, lift, jump, and run normally for age Able to walk around the neighbourhood without walking about difficulty, and without walking equipment Some problems in Walks, bends, lifts, jumps, or runs with some limitations Able to walk around the neighbourhood with difficulty; walking about but does not require help but does not require walking equipment or the help of another person Confined to bed Requires mechanical equipment (such as canes, crutches, Able to walk around the neighbourhood with walking braces, or wheelchair) to walk or get around equipment, but without the help of another person independently Requires the help of another person to walk or get around and requires mechanical equipment as well Able to walk only short distances with walking equipment, and requires a wheelchair to get around the neighbourhood Unable to walk alone, even with walking equipment. Able to walk short distances with the help of another person, and requires a wheelchair to get around the neighbourhood Cannot walk at all Unable to control or use arms and legs Pain/Discomfort Pain Pain No pain or Free of pain and discomfort Free of pain and discomfort discomfort Moderate pain or Occasional pain. Discomfort relieved by non-prescription Mild to moderate pain that prevents no activities discomfort drugs or self-control activity without disruption of normal activities Extreme pain or Frequent pain. Discomfort relieved by oral medicines Moderate pain that prevents a few activities discomfort with occasional disruption of normal activities Frequent pain; frequent disruption of normalactivities. Discomfort requires prescription narcotics for relief Severe pain. Pain not relieved by drugs and constantly Severe pain that prevents most activities disrupts normal activities Moderate to severe pain that prevents some activities Generally happy and free from worry Happy and interested in life Occasionally fretful, angry, irritable, anxious, depressed, Somewhat happy or suffering night terrors Often fretful, angry, irritable, anxious, depressed, or Somewhat unhappy suffering night terrors Almost always fretful, angry, irritable, anxious, depressed Very unhappy Extremely fretful, angry, irritable, anxious, or depressed So unhappy that life is not worthwhile usually requiring hospitalization or psychiatric institutional care Table 1 continued Unable to learn and remember would want to develop a useful (informative) distinction between, say, European countries, distinguishing between Scandinavian and non-Scandinavian countries would be far less informative than distinguishing between Northern, Western, Eastern and Southern European countries. Note that the latter classification not only contains more categories but the countries are also more evenly distributed among categories. The Shannon index is defined as: where H represents the absolute amount of informativity captured, C is the number of possible categories (levels or permutations in this study), and pi = ni/N, the proportion of observations in the ith category (i = 1,...,C), where ni is the observed number of scores (responses) in category i and N is the total sample size [17]. Any log base can be used, as long as one is consistent. Using log base 2, as did Shannon, allows the interpretation of the resulting units as bits per individual. The higher the index H is, the more information is captured by the system. In case of a homogeneous (rectangular) distribution, i.e. ratings are evenly distributed among categories (pi = p* for all i), the optimal amount of information is captured and H has reached its maximum (Hmax) which equals log2C. If the number of categories (C) is increased, Hmax increases accordingly but H will only increase if the newly added categories are actually used. The variance of the Shannon index is defined as [31]: Accordingly, standard errors and 95% confidence intervals can be calculated. The Shannon index combines the absolute information content as expressed by the number of categories with the extent to which the information is evenly spread over these categories. Shannons Evenness index (J) exclusively reflects the latter component, i.e. Somewhat forgetful, and have a little difficulty when trying to think or solve day to day problems Very forgetful, and have great difficulty when trying to think or solve day to day problems Unable to remember anything at all, and unable to think or solve day to day problems the rectangularity of a distribution. This measure was first proposed by Lloyd and Ghelardi [32]; Shannon already referred to it as relative entropy and Pielou termed the concept evenness [17, 33]. Shannons Evenness index (J) is defined as: J = H/Hmax, which expresses the use of the system (H) given its potential (Hmax). Shannons index H can be considered as an expression of the absolute informativity of a system whereas Shannons Evenness index J expresses the relative informativity of a system or evenness of a distribution, regardless the number of categories. Two alternative measures of (bio)diversity are the Simpson and the Brillouin index. We used the Shannon index, since the Brillouin index is dependent on sample size and the Simpson index gives very little weight to categories that are rarely occupied [26, 34, 35]. Shannon indices applied to MAUIs The basic characteristics of Shannons indices which make them suitable to reflect discriminatory power have been documented and are explained as follows. In an item where a response option has a very high (or low) endorsement, e.g. p is over 0.95 (or under 0.05), one learns very little because one can predict with more than 95% certainty what the answer will be. In other words, there is very little information being transmitted. Conversely, the maximum amount of information (uncertainty) is being transmitted when, in an item with two response options, p is 0.50 for each response option. As described above, this characteristic of an even distribution underlies the Shannon indices. In case of an even distribution, the item (dimension) is being most efficiently used, which means that the discriminant ability of the level descriptors is maximal. The Shannon indices can be calculated by dimension separately or by MAUI as a whole. To calculate Shannons indices by dimension, levels are treated as categories, so C represents the number of levels (L), pi is the proportion of responses of the ith level, and Hmax equals log2L. Suppose the EQ-5D Mobility dimension is scored by 10 respondents: no problems (n = 6), some problems (n = 3) and confined to bed (n = 1). Shannons index for Mobility is calculated as 3 Level System H = 1.15 J = 0.72 3 Level System H = 1.58 J = 1.00 3 Level System H = 1.15 J = 0.72 5 Level System H = 1.15 J = 0.49 3 Level System H = 1.58 J = 1.00 5 Level System H = 2.32 J = 1.00 Fig. 1 Examples of Absolute Informativity (H) and Relative Informativity (J) with Skewed and Rectangular Distributions in a 3 Level System and 5 Level System H = ((0.6 log2 0.6) + (0.3 log2 0.3) + (0.1 log2 0.1)) = 1.30 and Hmax = log23 = 1.58, so J = 1.30/ 1.58 = 0.82. Figure 1 illustrates the difference between absolute and relative informativity (H, evenness J) relative to the number of levels (L) in a series of hypothetical health classification systems designed to describe the same underlying dimension. For illustrative purposes we consider only one dimension. Figure 1a shows two distributions of responses corresponding to two different classification systems, both of which have 3 levels; one system results in a skewed distribution while the other results in a rectangular distribution. Assuming these responses are obtained within the same population, the system that yields the rectangular distribution is superior in discriminating between patients and the Shannon indices have both reached their maximum values. Figure 1b illustrates the concept of relative informativity. The left panel shows the same skewed distribution as depicted in Figure 1a, the right panel shows the same distribution of responses but now as it results from a 5 level classification system in which levels 2 and 4 are unused. Absolute informativity (Shannons H) remains unchanged but J decreases, expressing lower relative informativity. Clearly, adding 2 extra levels that do not represent anyone in the population (no individual shifts from a current level to any of the new levels) does not lead to a gain in absolute informativity (H) while the potential of a 5 level system is underutilized, compared to a 3 level system, which is expressed by a lower J. So why not use just the Shannon Evenness index? Figure 1c shows the added value of absolute informativity (the H index). If the 3 and 5 level systems both yield rectangular distributions, evenness J will be the same but obviously H increases since the 5 level system is much more refined in discriminating between patients. To calculate Shannons indices by instrument as a whole, permutations are treated as unique categories (e.g. 243 categories for EQ-5D), so C is the number of permutations (Pmax), pi is the proportion of the ith permutation, and Hmax now equals log2Pmax. Since the number of observations in our study (N = 3,691) is lower than the number of theoretically possible permutations in HUI2 (8,000) and HUI3 (972,000), maximum informativity (Hmax) in HUI2 and HUI3, and consequently maximum relative informativity J cannot be reached a priori. Therefore, Shannons indices by MAUI as a whole were calculated using an estimation approach. Assuming that the current sample is representative, subsamples of the original set of observed health states were drawn in order to estimate the number of different health states in hypothetical populations of 1, 10, and 100 million respondents, by means of extrapolation. This procedure was repeated for different proportions of the population in relation to the number of health states (e.g. 11 different EQ-5D health states accounted for a 90% proportion of the respondents), in order to estimate the shape of the frequency distribution in the hypothetical populations of 1, 10, and 100 million respondents. Finally, Shannons H and J could be calculated (details can be obtained from the authors). The mean age of the respondents was 42.9 years (range: 18.099.3 years), with 42.2% of the respondents being male. White (non-Hispanic) respondents were 1,435 (38.9%), non-Hispanic blacks were 1,018 (27.6%) and Hispanic were 1,100 (29.8%). Table 2 shows the frequencies of responses to the EQ-5D, HUI2 and HUI3 dimensions. The dominant response was no problems (level 1) for all dimensions in all instruments, with a proportion larger than 90% for 1 out of 5 dimensions in EQ-5D (Self-Care), 1 out of 6 in HUI2 (Self-Care) and 3 out of 8 in HUI3 (Hearing, Speech, Dexterity). In all EQ-5D and HUI2 dimensions, frequencies decreased with increasing level severity. In the HUI3 Cognition dimension however, more respondents reported problems at level 3 (17.9%) and level 4 (7.4%) than at level 2 (4.1%). Although small, these differences also occurred in the HUI3 Vision and HUI3 Hearing dimensions. Figure 2 shows absolute informativity (Shannons H) and relative informativity (Shannons Evenness J) of the common dimensions among the three instruments. Absolute informativity (H) was highest for HUI3 in all common dimensions, with largest differences between HUI3 and the other two instruments in the dimensions Pain/Discomfort (0.52 compared to EQ-5D; 0.15 compared to HUI2) and Cognition (0.41 compared to HUI2). Relative informativity (J) was highest for EQ-5D in all common dimensions, with largest differences with the other two instruments in the dimensions Mobility/ Ambulation (0.14 compared to HUI2; 0.16 compared to HUI3) and Anxiety/Depression/Emotion (0.14 compared to HUI2; 0.13 compared to HUI3). Table 3 shows Shannons indices by classification system as a whole. The EQ-5D, HUI2 and HUI3 descriptive systems distinguished 91, 322, and 694 observed different unique health states, accounting for 37.4%, 4.0%, and 0.07% of all possible permutations, respectively. The estimation procedure indicated that absolute informativity was highest for HUI3 (range 10.9613.36), followed by HUI2 (range 8.579.48), and lowest for EQ-5D (range 6.246.41). Relative informativity was highest in EQ-5D (range 0.790.81), followed by HUI2 (range 0.660.73), and lowest for HUI3 (range 0.550.67). We compared the discriminatory power of the EQ-5D, HUI2 and HUI3 in the general population, using Shannons indices of absolute and relative informativity, for each dimension separately and by MAUI as a whole. As might be expected in a general population sample, most respondents reported no problems on all 90 80 70 60 p 50 i 40 30 20 10 0 100 90 80 70 60 pi 5400 30 20 10 0 70 60 50 p 40 i 30 20 10 0 80 70 60 50 pi 4300 70 60 50 pi 4300 20 10 0 Fig. 2 The Shannon Index (H) and the Shannon Evenness Index J0y for the common dimensions between EQ-5D, HUI2 and HUI3: comparison by dimension. NA = not available; y Confidence intervals had an average range of 0.0012 (H) and of 0.00081 (J) dimensions and there were fewer responses with increasing level severity. An exception is HUI3 Cognition, where respondents reported more problems on levels 3 and 4 than on level 2. This is probably due to the fact that this dimension is not unidimensional, and levels 2 and 3 are conceptualized parallel rather than ordinal. That is, HUI3 Cognition level 2 focuses on problems in thinking and problem solving, level 3 addresses problems in remembering, whereas level 4 combines the problems mentioned in levels 2 and 3. Absolute informativity by dimension was highest for the HUI3 descriptive system. EQ-5D appears to underperform in the Pain/Discomfort dimension. Moreover, EQ-5D appears to miss a considerable amount of disability: 61.3% of the population indicated to have no problems on EQ-5D, against 48.2% on HUI2 and 49.3% on HUI3 (Table 2). Shannons H translated this difference adequately (Fig. 2). Apparently, for this population, the EQ-5D would benefit from more levels on the Pain/Discomfort dimension. Regarding the Cognition dimension, the difference in absolute informativity between HUI2 and HUI3 might be explained by the 2 extra levels in HUI3, but the higher J value in HUI3 suggests an alternative contributive factor. One explanation may be that HUI3 Cognition is not unidimensional and more sensitive to mild problems (levels 24) than HUI2 Cognition (level 2). Another explanation could be that the difference is due to currently suboptimal recoding algorithms. For relative informativity by dimension, the EQ-5D descriptive system showed superior results in Mobility/ Ambulation, Self-Care and Anxiety/Depression/Emotion. The large differences in Mobility/Ambulation could be due to a relatively large leap in the grading of the level descriptions in HUI3 Ambulation, where the difference between level 1 (without difficulty) and level 2 (with difficulty) can be considered disproportionately large in a 6 level dimension. The same leap from level 1 (normal) to level 2 (with difficulty) occurs in HUI2 Self-Care. We found that the 3 level EQ-5D Self Care outperformed the 4 level HUI2 SelfCare in both absolute and relative informativity (Fig. 2), which is probably due to the severe grading of level 2 in HUI2. The difference in relative informativity between EQ-5D and the HUI instruments in Anxiety/ Depression/Emotion is probably due to the 2 extra levels in HUI2 and HUI3 that are rarely endorsed. Overall, performance in terms of informativity of EQ-5D, HUI2 and HUI3 of the common dimensions varies over dimensions. The Pain/Discomfort dimension of EQ-5D, but perhaps also other dimensions, might benefit from an extension to 4 or 5 levels. HUI2 Table 3 Shannons index (H) and Shannons evenness index (J) for EQ-5D, HUI2, and HUI3: Comparison by instrument and HUI3 might benefit from more sensitive grading terms in their level descriptions, especially the threshold level 2, in Ambulation (HUI3) and SelfCare (HUI2). When assessing informativity by instrument, HUI3 shows the best results on absolute informativity but the lowest on relative informativity while EQ-5D shows highest relative informativity and lowest absolute informativity. HUI2 seems to be the optimal compromise. The importance of differences in the Shannon indices ultimately requires empirical evidence over a wider range of populations, conditions and instruments, including evidence on discriminant validity. As Shannons indices are new in the field of health status measurement, some methodological issues need to be addressed, taking into account that their principal focus is on classifications with mutually exclusive categories, rather than conventional (health status) measures which by design contain multiple partially overlapping items. The Shannon indices share some properties with reliability coefficients. Like reliability indices, they express discriminatory power. Furthermore, they are also non-dimensional, i.e. they have no relation to the content, meaning or clinical relevance of what the instrument aims to measure, which make them suitable for comparability, between instruments as well as between populations. However, reliability reflects two different concepts: discriminatory power as such, and consistency, e.g. consistency between raters (inter-rater reliability) or consistency over time (test-retest reliability). This requires a repeated measurement (repetition over raters or over time) which introduces an error component in case of a difference among the repeated measurements. Shannons indices solely reflect discriminatory power, and need only a single measurement. Furthermore, the Shannon indices are non-parametric measures and therefore highly suitable for nominal or ordinal measurement scales. Since Shannons indices have no dimension and are independent of any external standard, a rectangular distribution is always the ideal from the perspective of informativity. When comparing the discriminatory power of similar dimensions of different MAUIs, rectangularity is always optimal as it reflects which MAUI is the most sensitive in discriminating between different persons in that particular population. This implies that one MAUI cannot be superior in varying populations (e.g. a general population and a diseased population sample). Furthermore, MAUIs are bound to score rather low on discriminatory power in a general population sample, as the extreme categories, which have to be included for coverage of the full spectrum of diseases, will not be endorsed frequently. Previously, the common approach to investigate discriminatory power was examining the frequency distributions of responses, e.g. for ceiling or floor effects. A comprehensive, formal measure to express discriminatory power such as Shannons indices seems clearly superior to such a face-value method. Furthermore, when the number of categories is large (e.g. when comparing MAUIs as a whole), it becomes very difficult to make a sound comparison by just looking at the distributions. We have demonstrated the use of the Shannon indices to compare the discriminatory power of different MAUIs, to show which instrument is more sensitive in differentiating between levels of health in the population at hand. But they may also be used to guide the development of new, or optimization of existing MAUIs, by helping determine how many levels are efficient for each dimension. This is a particularly relevant consideration for MAUIs, since adding extra levels in a descriptive system makes it increasingly complex, and the derivation of a robust set of preference weights more challenging. Apart from MAUIs, the Shannon indices can also be used in a wide range of other classifications in the medical domain (e.g. the Karnofsky scale, the Spitzer QL index) and in the clinical domain (e.g. the APGAR score, the Child-Pugh classification). A practical weakness of the Shannon approach is that when the sample size is exceeded by the total number of health states described by all permutations across all dimensions of a MAUI, informativity (for the instrument as a whole) has to be estimated. This implies that using the Shannon Evenness index by instrument is not very practical when a health classification system has a large number of permutations as was the case in HUI3 (972,000 permutations). This however is not a disadvantage of the Shannon methodology per se, but also a matter of classification design (overload of dimensions with detailed response options producing an excessive amount of empty permutations), or a practical problem (excessive data collection). From a clinical or psychometric perspective it may seem tempting to extend any MAUI with extra levels or dimensions as it provides more clinically relevant detail generally and improves reliability. But Shannons indices reveal that this may not always be a prudent approach. Increasing the number of levels per dimension (or permutations in the entire system) will probably result in higher H values but J values are likely to drop, as in fact our results for HUI3 indicate. This raises the question where the balance between H and J is optimal as more categories require more extensive subsequent studies to derive utility functions for the associated classification system. How the Shannon indices will behave in a different population, such as patient populations, remains to be investigated. So far, Shannons indices proved to be useful in showing weaknesses of level gradings used in EQ-5D, HUI2 and HUI3, and offers leads for improvement, establishing their practical psychometric value. Acknowledgements We would like to thank Stephen Joel Coons and James Shaw for assisting with the dataset. Part of the material presented in this paper was presented and discussed at the 2005 Annual EQ Meeting. We also thank Thomas Kohlmann for presenting a commented draft on part of our analysis, including a useful example in making the theory understandable.


This is a preview of a remote PDF: http://link.springer.com/content/pdf/10.1007%2Fs11136-006-9160-6.pdf

Mathieu F. (Bas) Janssen, Erwin Birnie, Gouke J. Bonsel. Evaluating the discriminatory power of EQ-5D, HUI2 and HUI3 in a US general population survey using Shannon’s indices, Quality of Life Research, 2007, 895-904, DOI: 10.1007/s11136-006-9160-6