Erratum to: Numerical and experimental investigation of the grain refinement of liquid metals through cavitation processing

Metals and Materials International, Mar 2016

R. Haghayeghi, L. Nastac

A PDF file should load here. If you do not see its contents the file may be temporarily unavailable at the journal website or you do not have a PDF plug-in installed and enabled in your browser.

Alternatively, you can download the file locally and open with any standalone PDF reader:

https://link.springer.com/content/pdf/10.1007%2Fs12540-016-0001-z.pdf

Erratum to: Numerical and experimental investigation of the grain refinement of liquid metals through cavitation processing

Met. Mater. Int., Vol. Erratum to: Numerical and Experimental Investigation of the Grain Refine- ment of Liquid Metals through Cavitation Processing R. Haghayeghi 1 3 4 E. Ezzatneshan 1 2 4 H. Bahai 0 1 4 L. Nastac 1 4 2 0 Brunel University, School of Engineering and Design , Uxbridge, Middlesex, UB8 3PH , UK 1 After correction R. Haghayeghi 2 The University of Alabama, Department of Metallurgical and Materials Engineering , Tuscaloosa, AL 35487-0202 , USA 3 Department of Materials Engineering, Science and Research Branch, Islamic Azad University , Tehran , Iran 4 Before correction R. Haghayeghi Following the authors' request, there is a change in the authorship of the article “Numerical and Experimental Investigation of the Grain Refinement of Liquid Metals through Cavitation Processing”, in Metals and Materials International, Vol.19 (2013) pp.959-967. The second and third authors clarified that they had no knowledge on the source and use of the data and the figures appeared in the paper, and requested the removal of their name from the author list. The corresponding author agreed the removal of the second and third authors' name from the author list.


This is a preview of a remote PDF: https://link.springer.com/content/pdf/10.1007%2Fs12540-016-0001-z.pdf

R. Haghayeghi, L. Nastac. Erratum to: Numerical and experimental investigation of the grain refinement of liquid metals through cavitation processing, Metals and Materials International, 2016, pp. 345, Volume 22, Issue 2, DOI: 10.1007/s12540-016-0001-z